Airtac SE32 Standard Cylinder SE32X100H
The AirTAC Airtac SE32 Standard Cylinder SE32X100H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X100H
The AirTAC SE32X100H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature actuation. Equipped with a Viton (FKM) seal, it reliably operates in environments reaching up to 150 C, far exceeding the thermal limits of standard elastomers. Delivering 402 N of push force at 0.5 MPa, this 32 mm bore unit is built for compact, demanding cycles.
The extruded aluminum barrel features a square design free of external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. Integrated sensor grooves on three sides allow flexible placement of position switches, though this specific SKU lacks the built-in magnet required for electronic sensing. Field-adjustable air cushions at both stroke ends let technicians fine-tune end-of-travel deceleration to protect tooling.
Airtac SE32 Standard Cylinder SE32X100H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X100H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X100H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X100H Is Used
Lab Oven Doors
Leveraging the 150 C FKM seal, this cylinder opens and closes high-temperature sterilization oven doors where standard rubber seals would melt, using its 402 N push force to swing the latch securely.
Shrink Wrap Trolleys
Cycles a 100 mm stroke to position product trolleys inside shrink-wrap heat tunnels, maintaining structural integrity in ambient heat while decelerating smoothly via its adjustable air cushions.
Hot Stamping Ejectors
Ejects small thermoplastic parts from heated molds, where the compact 32 mm profile and high-temp Viton seal survive radiant heat without tie-rod interference.
Is the Airtac SE32 Standard Cylinder SE32X100H the Right Cylinder?
Delivering 402 N of push force at 0.5 MPa, this 32 mm bore cylinder is suited for lighter loads. If your application requires less power, the 32 mm bore is the smallest standard ISO 15552 size available. If you need to step up to a heavier class, the 40 mm bore provides 628 N of push at 0.5 MPa. Because this unit uses an FKM seal, ensure your lubricants and cleaning chemicals are compatible with Viton to prevent premature degradation.
This SE32X100H is dimensionally interchangeable with other ISO 15552 cylinders, making it a drop-in retrofit for existing 32 mm bore, 100 mm stroke hardware using the standard PT1/8 port and M10x1.25 rod thread. Note that a standard double-acting cylinder cannot hold a load if air pressure is lost; if your process requires position holding during an exhaust or power failure, consider an AirTAC BSE rod lock variant. The 100 mm stroke is well below the 300 mm threshold, so side-load bending stress on the Ø12 mm rod bearing is minimal, though long unsupported loads still require an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X100H FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push of 82 kgf at 1.0 MPa. Because it uses an FKM (Viton) seal, the operating temperature extends from -20 C up to 150 C.
Yes. The SE32X100H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other 32 mm bore profile cylinders using the same mounting hardware, PT1/8 port, and M10x1.25 rod thread. Note that this specific SKU lacks a piston magnet, so it cannot trigger CMSE or DMSE reed or electronic sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X100H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.