Airtac SE32 Standard Cylinder SE32X1070S
The AirTAC Airtac SE32 Standard Cylinder SE32X1070S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 1070mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke1070 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X1070S
The AirTAC SE32X1070S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear motion. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force, making it suitable for light-duty actuation. Because this unit features a built-in magnet (-S), it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors for exact end-of-stroke detection.
Designed with a square extruded aluminum barrel, this profile cylinder eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight spaces. The 1070 mm stroke exceeds the standard 1000 mm maximum for this bore, making it a non-standard, made-to-order unit. It includes field-adjustable air cushioning at both ends to decelerate the piston near the end caps, softening hard impacts at speed.
Airtac SE32 Standard Cylinder SE32X1070S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X1070S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1070 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X1070S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×1070 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X1070S Is Used
Textile Spreader Guides
Drives fabric guide mechanisms on weaving looms, utilizing the 1070 mm stroke and 402 N push force to maintain web tension across wide material rolls.
Packaging Line Diverter
Actuates sorting arms on secondary packaging lines, using the integrated magnet for DMSE electronic sensors to confirm retract positions at 30-800 mm/s.
Lab Sample Transport
Moves sample trays between testing stations in analytical equipment, where the compact tie-rod-free profile saves valuable machine space.
Is the Airtac SE32 Standard Cylinder SE32X1070S the Right Cylinder?
Stepping down to a smaller bore is not an option since 32 mm is the smallest SE size available. If your application requires more force, moving up to the SE40 bore increases your 0.5 MPa push force to 628 N. Keep in mind that a plain SE cylinder does not hold its position or load when air is lost or the valve is centered; the piston will drift. If your setup must hold a load without live pressure, consider the BSE rod lock variant.
For a stroke of 1070 mm, the unsupported length of the 12 mm rod introduces a risk of rod-bearing bending under side loads. Even with the field-adjustable end cushions, an external guide is highly recommended to prevent premature wear. This model is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 cylinders using the same PT1/8 port and mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X1070S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operating at the maximum pressure of 1.0 MPa.
Yes. The SE32X1070S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting interface, PT1/8 port, and 32 mm bore footprint as other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X1070S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.