Airtac SE32 Standard Cylinder SE32X110S
The AirTAC Airtac SE32 Standard Cylinder SE32X110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X110S
The AirTAC SE32X110S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa, utilizing a 32 mm bore and 110 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Because this configuration includes the -S option, an internal ring magnet travels with the piston to trigger CMSE reed or DMSE electronic sensors along the body grooves. The integrated adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, preventing hard mechanical impacts during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X110S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X110S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X110S Is Used
PCB Depaneling Router
Provides the precise 402 N linear feed to plunge and route populated circuit boards, using the -S magnet and DMSE sensors to verify exact cutting depth.
Blister Pack Sealing
Drives the upper heated platen on small medical blister packaging lines, where the smooth tie-rod-free profile prevents film snagging during fast 110 mm strokes.
Lab Dispense Valve
Actuates a precision needle valve for 2-part epoxy metering, relying on the adjustable end cushions to prevent fluid splashing when the 32 mm rod retracts.
Is the Airtac SE32 Standard Cylinder SE32X110S the Right Cylinder?
Selecting the SE32X110S is optimal when an application requires approximately 402 N of push force at 0.5 MPa. If your assembly needs less power, stepping down is not an option as 32 mm is the smallest standard SE bore. If higher thrust is necessary, the next size up is the 40 mm bore, which provides a 628 N push at 0.5 MPa. This 110 mm stroke falls below the 300 mm threshold, so standard rod bearing loading applies without requiring external guides.
For drop-in retrofits, this cylinder is dimensionally interchangeable with any standard ISO 15552 cylinder, matching the 32 mm footprint, PT1/8 port, and standard mounting accessories. Remember that the adjustable cushion only softens the stroke end; it does not lock the piston. If air pressure drops, the rod will drift, so a BSE rod lock is required for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X110S FAQ
At 0.5 MPa, the SE32X110S provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum rated push force is 82 kgf at 1.0 MPa.
Yes, the SE32X110S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the standardized 32 mm mounting interface and PT1/8 port, allowing you to reuse existing mounting brackets and rod-end joints.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.