Airtac SE32 Standard Cylinder SE32X114S
The AirTAC Airtac SE32 Standard Cylinder SE32X114S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 114mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke114 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X114S
The AirTAC SE32X114S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 32 mm bore and a 114 mm stroke. Because 114 mm is not on the standard stroke list, this specific length is manufactured as a made-to-order unit. It delivers 402 N of push force at 0.5 MPa and 563 N at 0.7 MPa, making it well-suited for compact, lower-force positioning tasks.
The extruded aluminum barrel lacks external tie rods, which keeps the body smooth and corrosion-resistant for flush mounting in tight machine bays. Equipped with a built-in magnet (S option), this cylinder directly supports AirTAC CMSE reed and DMSE electronic position sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, protecting sensitive payloads from hard impacts.
Airtac SE32 Standard Cylinder SE32X114S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X114S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 114 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X114S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×114 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X114S Is Used
PCB Component Insertion
Provides the precise 402 N push required to seat electronic connectors onto printed circuit boards without damaging delicate substrates.
Small Carton Flap Folding
Uses the 114 mm stroke to fold light cardboard flaps on compact packaging lines, benefiting from the smooth no-tie-rod profile.
Lab Sample Dispensing
Actuates fluid dispensing valves where the built-in magnet triggers DMSE electronic sensors for exact volume metering.
Is the Airtac SE32 Standard Cylinder SE32X114S the Right Cylinder?
This 32 mm bore provides 402 N push at 0.5 MPa. If your application requires less force, there is no smaller standard ISO 15552 bore in the SE range, so you must rely on this minimum size. If you need substantially more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. For applications requiring position holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
For ISO 15552 dimensional interchangeability, this model maps directly to a 32 mm bore, 114 mm stroke, PT1/8 port, and basic mounting footprint. Because the stroke exceeds 100 mm, be mindful of rod-bearing bending on long unsupported loads; utilizing an external guide rail is recommended to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X114S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operating at the maximum rated pressure of 1.0 MPa.
Yes. The SE32X114S is dimensionally interchangeable per ISO 15552 mounting interface standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT1/8 port and features a built-in magnet for CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X114S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.