Airtac SE32 Standard Cylinder SE32X135S
The AirTAC Airtac SE32 Standard Cylinder SE32X135S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke135 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X135S
The AirTAC SE32X135S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it utilizes a square extruded aluminum barrel that eliminates external tie rods, ensuring flush mounting and high corrosion resistance. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows you to tune the 27 mm cushion length via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycles. This is a true deceleration cushion, not a fixed rubber bumper, ensuring quiet operation without drifting or holding the load when air is exhausted.
Airtac SE32 Standard Cylinder SE32X135S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X135S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X135S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X135S Is Used
PCB Drill Clamp
Provides 402 N of precise clamping force at 0.5 MPa for securing delicate printed circuit boards during high-speed CNC drilling operations.
Package Diverter
Utilizes the 135 mm stroke and integrated DMSE sensor feedback to rapidly divert small cartons between packaging lines without lateral overhang.
Lab Sample Ejector
Pushes test tubes out of centrifuge slots with 345 N pull force on retract, relying on the adjustable cushion to prevent glass breakage.
Is the Airtac SE32 Standard Cylinder SE32X135S the Right Cylinder?
Generating 402 N push at 0.5 MPa, this 32 mm bore is ideal for light-duty handling. If your payload drops below 200 N, stepping down is unnecessary as 32 mm is the smallest standard SE bore. If you need substantially more force for heavier fixtures, the next size up is the 40 mm bore, which provides 628 N push at 0.5 MPa. Keep in mind a plain SE cylinder will drift if air pressure is lost; for safety-critical load holding, consider the BSE rod lock variant. With a 135 mm stroke, side-load stress on the 12 mm rod bearing remains low, but always verify guide alignment.
For ISO 15552 retrofit projects, this SE32X135S is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a PT1/8 port, an M10x1.25 rod thread, and the built-in magnet (-S) ensures out-of-the-box compatibility with standard AirTAC CMSE and DMSE sensor rails.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X135S FAQ
The SE32X135S delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE32X135S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, 32 mm bore, and 135 mm stroke dimensions for drop-in replacement, without claiming to be identical to a specific brand's part.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X135S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.