Airtac SE32 Standard Cylinder SE32X175S
The AirTAC Airtac SE32 Standard Cylinder SE32X175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X175S
The AirTAC SE32X175S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it features a square extruded aluminum barrel without external tie rods. This clean-profile design resists corrosion and allows for flush mounting in tight machine envelopes.
This specific configuration includes the -S magnet code, enabling seamless integration with AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. Furthermore, the field-adjustable air cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s operations.
Airtac SE32 Standard Cylinder SE32X175S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X175S Is Used
PCB Depaneling Router
Provides the 402 N push force needed to drive a cutting head through rigid circuit boards, while the 175 mm stroke accommodates varying panel sizes.
Small Carton Flap Folder
Utilizes the integrated -S magnet with DMSE sensors to verify flap position at high speeds, ensuring precise folding before sealing on compact packaging lines.
Lab Sample Dispenser
Leverages the adjustable air cushion to gently decelerate the 12 mm rod at the end of its 175 mm travel, preventing the ejection of fragile vials.
Is the Airtac SE32 Standard Cylinder SE32X175S the Right Cylinder?
When sizing this 32 mm bore actuator, evaluate your exact force requirements. If 402 N of push at 0.5 MPa is insufficient, stepping up to the 40 mm bore yields 628 N. Conversely, if you require less force, dropping to a smaller bore is not an option as 32 mm is the smallest standardized SE diameter. Keep in mind that a plain double-acting cylinder does not hold a load if air pressure is lost; for position holding, consider the BSE rod lock variant.
With a 175 mm stroke, the 12 mm rod and M10x1.25 thread provide a robust interface, but long unsupported strokes can induce rod-bearing bending. For applications exceeding 300 mm, adding an external guide rail is recommended to prevent side-load damage. This cylinder serves as a drop-in ISO 15552 dimensional replacement, sharing standardized mounting hardware and a PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X175S FAQ
This 32 mm bore cylinder delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE32X175S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint and hardware interface, though its extruded profile barrel lacks external tie rods, offering a cleaner exterior.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.