Airtac SE32 Standard Cylinder SE32X175SN
The AirTAC Airtac SE32 Standard Cylinder SE32X175SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X175SN
The AirTAC SE32X175SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. At 32mm bore, it yields 402N push and 345N pull at 0.5 MPa. The extruded aluminum barrel lacks external tie rods, offering a clean, corrosion-resistant body that mounts flush in tight machine envelopes.
This specific unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with NBR seals for standard operating temperatures. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration precisely, protecting delicate payloads during the 175mm travel.
Airtac SE32 Standard Cylinder SE32X175SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X175SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X175SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X175SN Is Used
PCB Router Clamping
Provides 402N of precise holding force to secure printed circuit boards inside electronic routing machines during high-speed spindle machining.
Carton Flap Folding
Drives the mechanical arms on automated packaging lines to fold corrugated cardboard flaps cleanly over a 175mm travel distance.
Lab Dispenser Positioning
Actuates reagent nozzle arrays in diagnostic analyzers, relying on the compact tie-rod-free profile and NBR seals for cleanroom compatibility.
Is the Airtac SE32 Standard Cylinder SE32X175SN the Right Cylinder?
Stepping down to a 25mm bore reduces the 0.5 MPa push force, whereas moving up to a 40mm bore provides 628N of thrust. Because this is a standard double-acting cylinder, it cannot hold a load unpowered—applications requiring true mid-stroke locking or fail-safe holding must use an external pilot-operated check valve or a BSE rod-lock variant. For a 175mm stroke, the 12mm rod and M10x1.25 thread handle moderate side loading, but an external guide rail is recommended to prevent rod-bearing bending under heavy lateral moments. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in retrofit for standardized 32mm bore foot and flange mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X175SN FAQ
At 0.5 MPa, this 32mm bore cylinder generates 402N of push force and 345N of pull force. At 0.7 MPa, the push force is 563N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X175SN is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, port size (PT1/8), and rod thread (M10x1.25) as other standardized 32mm profile cylinders, allowing a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X175SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.