Airtac SE32 Standard Cylinder SE32X180S
The AirTAC Airtac SE32 Standard Cylinder SE32X180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke180 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X180S
The AirTAC SE32X180S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa across its 180 mm stroke, it utilizes a clean extruded aluminum barrel without external tie rods. This design not only prevents surface contamination but allows for flush mounting in tight machine envelopes.
Equipped with a built-in magnet (-S), the cylinder interfaces seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends can be tuned via a set screw to soften impact at high cycling speeds, ensuring smooth deceleration rather than relying on a fixed bumper.
Airtac SE32 Standard Cylinder SE32X180S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X180S Is Used
PCB Routing Clamp
Provides 402 N of clamping force at 0.5 MPa to secure printed circuit boards during automated routing and drilling processes.
Carton Sealing Flap
Drives the 180 mm stroke needed to fold minor and major flaps on packaging lines, utilizing the integrated magnet for DMSE electronic timing.
Component Ejection
Pushes lightweight plastic molded parts out of machining fixtures, relying on adjustable end cushions to prevent part marking at high speeds.
Is the Airtac SE32 Standard Cylinder SE32X180S the Right Cylinder?
If your application requires less force, stepping down to the neighboring 32 mm bore is not an option, but moving up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Conversely, if you need to step down from a 40 mm body, this 32 mm cylinder provides 402 N of push at 0.5 MPa. As a standard ISO 15552 profile body, it serves as a drop-in dimensional replacement for any ISO 15552 cylinder, retaining the PT1/8 port and M10x1.25 rod thread. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X180S FAQ
At 0.5 MPa, the SE32X180S generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the SE32X180S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 cylinders, matching the 32 mm bore, 180 mm stroke, PT1/8 port, and standard mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.