Airtac SE32 Standard Cylinder SE32X190S
The AirTAC Airtac SE32 Standard Cylinder SE32X190S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke190 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X190S
The AirTAC SE32X190S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers 402 N of push force at 0.5 MPa and utilizes a square extruded aluminum barrel without external tie rods, allowing it to mount flush in tight machine cells while resisting corrosion.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors along its three integrated grooves. The field-adjustable pneumatic cushioning at both ends lets technicians dial in end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X190S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X190S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X190S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X190S Is Used
PCB Depaneling Router
Provides the 402 N push force needed to clamp populated circuit boards during automated routing and depaneling processes.
Package Sorting Diverter
Extends 190 mm to push lightweight cardboard cartons off a main conveyor belt into secondary packing chutes.
Lab Sample Dispenser
Actuates a 190 mm stroke to position pipette arrays over microplate wells, utilizing the compact profile to fit in fume hoods.
Is the Airtac SE32 Standard Cylinder SE32X190S the Right Cylinder?
Selecting the SE32X190S is optimal when a 190 mm stroke requires roughly 402 N of push at 0.5 MPa. If your assembly needs less force, the adjacent 32 mm bore is the smallest standard ISO 15552 size available, meaning stepping down requires leaving the ISO profile range; conversely, stepping up to a 40 mm bore yields 628 N of push. Because the 190 mm stroke approaches the mid-range of unsupported travel, evaluate side-load bending moments on the Ø12 mm rod and utilize an external guide to prevent premature bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other 32 mm bore profile cylinders, matching the PT1/8 port and M10x1.25 rod thread. Note that this cylinder relies on live air pressure to move; it does not hold a load when air is exhausted, so integrate a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X190S FAQ
At 0.5 MPa, the SE32X190S provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operated at the 1.0 MPa pressure limit.
No, the standard SE32X190S does not hold position when air pressure is lost or the valve is centered; the piston will drift. The adjustable air cushion only decelerates the piston near stroke end and does not act as a brake. For fail-safe load holding, use an AirTAC BSE rod lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.