Airtac SE32 Standard Cylinder SE32X195
The AirTAC Airtac SE32 Standard Cylinder SE32X195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X195
The AirTAC SE32X195 is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and 195 mm stroke. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, making it well-suited for compact, lower-force motion tasks.
The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant body that mounts flush in tight spaces. Pneumatic cushioning at both ends is field-adjustable via a screw, letting you fine-tune end-of-stroke deceleration to prevent hard impacts. Note this SKU lacks a built-in magnet, so it does not directly support CMSE or DMSE position sensors without modification.
Airtac SE32 Standard Cylinder SE32X195 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X195
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X195 Is Used
PCB Depaneling Router
Provides the 402 N push force and 195 mm travel needed to drive a cutting spindle along a linear rail for singulating printed circuit boards.
Carton Flap Folder
Extends 195 mm to fold minor and major flaps on small product cartons, where the compact 32 mm profile prevents interference in tight packaging machine layouts.
Lab Sample Dispenser
Drives a 12 mm rod to actuate a pipetting head over a 195 mm stroke, moving vials within an analytical instrument without requiring high pneumatic force.
Is the Airtac SE32 Standard Cylinder SE32X195 the Right Cylinder?
If 402 N of push at 0.5 MPa is too much for your fixture, step down to the 25 mm bore (if available) or carefully regulate pressure; if you need more force, step up to the 40 mm bore which provides 628 N push. As a standard ISO 15552 cylinder, this unit is dimensionally interchangeable for drop-in replacement of other ISO 15552 cylinders using the same 195 mm stroke, PT1/8 port, and mounting hardware. Because the 195 mm stroke is relatively long for a 32 mm bore, use an external guide to prevent rod-bearing bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X195 FAQ
At 0.5 MPa, the SE32X195 provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
No, this is a double-acting cylinder and does not hold position when air is lost or exhausted. The adjustable air cushions only decelerate the piston near the end of the stroke to prevent hard impacts; they do not act as a lock or brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.