Airtac SE32 Standard Cylinder SE32X195S
The AirTAC Airtac SE32 Standard Cylinder SE32X195S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X195S
The AirTAC SE32X195S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear motion. Operating at 0.15-1.0 MPa, it delivers a 402 N push force at 0.5 MPa, making it well-suited for compact assembly automation. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in position magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke confirmation. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, effectively softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X195S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X195S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X195S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X195S Is Used
PCB Depaneling Router
Provides the 402 N push force required to clamp populated circuit boards securely during high-speed routing, while the magnet enables DMSE sensors to confirm gate closure.
Blister Pack Sealing
Cycles the 195 mm stroke to lower sealing heads onto blister card stock, using the adjustable end cushions to prevent jarring stops that could damage packaging film.
Lab Sample Dispenser
Actuates a 12 mm rod to drive pipette heads, benefiting from the smooth tie-rod-free extruded profile that resists corrosive laboratory atmospheres and wipes down easily.
Is the Airtac SE32 Standard Cylinder SE32X195S the Right Cylinder?
When sizing this 32 mm bore actuator, evaluate your force margins carefully. If your application requires less energy, stepping down is not an option as 32 mm is the smallest standard SE bore. Conversely, if you need substantially more power, stepping up to the 40 mm bore provides a 628 N push at 0.5 MPa. Because this model features a 195 mm stroke, the unsupported piston rod travels significantly; to prevent rod-bearing bending under lateral stress, always pair it with an external guide for heavy offset loads.
This cylinder serves as a drop-in replacement for any ISO 15552 cylinder, matching standard mounting dimensions exactly. To complete your setup, specify PT1/8 port threads, your preferred mounting accessory (such as LB foot or FA front flange), and CMSE or DMSE sensors to utilize the built-in magnet. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X195S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, and the maximum push capacity is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X195S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts designed for other ISO 15552 profile cylinders. Just ensure your porting matches the PT1/8 threads and utilize the built-in magnet with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.