Airtac SE32 Standard Cylinder SE32X200S
The AirTAC Airtac SE32 Standard Cylinder SE32X200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X200S
The AirTAC SE32X200S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers 402 N of push force at 0.5 MPa, utilizing a 32 mm bore and 200 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames to save valuable space.
This specific unit includes a built-in magnet (-S) for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. To protect internal components at cycle speeds up to 800 mm/s, it features field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in the exact end-of-stroke deceleration required by the load.
Airtac SE32 Standard Cylinder SE32X200S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X200S Is Used
PCB Depaneling Router
Provides the precise 402 N push force required to drive a router bit assembly through populated circuit boards without stressing delicate SMD components.
Small Carton Flap Folder
Utilizes the 200 mm stroke to fold corrugated cardboard flaps on high-speed packaging lines, where the compact tie-rod-free profile prevents snagging.
Lab Dispenser Head Actuation
Leverages the built-in magnet for DMSE electronic switch feedback, confirming the exact dispensing head position for viscous chemical metering tasks.
Is the Airtac SE32 Standard Cylinder SE32X200S the Right Cylinder?
When sizing this 32 mm bore actuator, evaluate if the 402 N push at 0.5 MPa is sufficient, or if stepping up to the 40 mm bore (628 N push) is necessary for heavier payloads. Conversely, if your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE size. Because this is a 200 mm stroke, the unsupported piston rod is prone to bending under lateral stress; always use an external guide to prevent side-load damage to the rod bearing. Remember that the adjustable air cushion only decelerates the piston near the end caps—it does not hold the load if air pressure is lost. For drop-in retrofits, this model is dimensionally interchangeable per ISO 15552, features a PT1/8 port, and uses the -S magnet for sensor tracks.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X200S FAQ
The SE32X200S provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards. However, the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold a load mid-stroke if air pressure is lost. For position holding, consider a BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.