Airtac SE32 Standard Cylinder SE32X200SH
The AirTAC Airtac SE32 Standard Cylinder SE32X200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X200SH
The AirTAC SE32X200SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers 402 N of push force at 0.5 MPa and features a 200 mm stroke. Equipped with a Viton (FKM) seal, it withstands operating temperatures up to 150 C, making it ideal for high-heat industrial applications where standard rubber seals would fail.
This 32 mm bore unit utilizes an extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. The integrated -S magnet enables precise position detection with AirTAC CMSE reed or DMSE electronic sensors. Furthermore, field-adjustable pneumatic cushioning at both stroke ends allows you to tune end-of-stroke deceleration via a screw, protecting payloads from harsh mechanical impacts.
Airtac SE32 Standard Cylinder SE32X200SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X200SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X200SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X200SH Is Used
Thermal Processing Doors
Actuates small access doors near industrial ovens where the 150 C FKM seal survives ambient heat and the 402 N push force easily overcomes hinge resistance.
Heat Shrink Wrapper
Cycles a 200 mm stroke to position film over hot shrink tunnels, relying on the adjustable air cushion to soften end stops during high-speed packaging runs.
Plastic Injection Molding Ejector
Ejects small molded parts from heated tooling zones, utilizing the integrated magnet and DMSE electronic sensors to confirm part release in automated cells.
Is the Airtac SE32 Standard Cylinder SE32X200SH the Right Cylinder?
If your application requires less push force, stepping down is not an option as 32 mm is the smallest standard SE bore. If you need more power, the next bore up is 40 mm, which provides 628 N of push at 0.5 MPa. Because this is a double-acting cylinder, it cannot hold a load unpowered—air loss causes piston drift, so integrate a BSE rod lock for secure positioning.
With a 200 mm stroke, the 12 mm rod and M10x1.25 thread are robust, but long unsupported strokes invite rod-bearing bending; always use an external guide to prevent side-loading damage. This model is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 cylinders while retaining the PT1/8 port and high-temperature FKM seal.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X200SH FAQ
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. At 0.7 MPa, push increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The cylinder operates at speeds of 30-800 mm/s and uses a PT1/8 port.
Yes, the SE32X200SH is dimensionally interchangeable per ISO 15552, acting as a drop-in replacement for other standard profile cylinders. The H seal option designates a Viton (FKM) seal, expanding the operating temperature range from -20 to +150 C, compared to the standard -20 to +70 C range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.