
The AirTAC SE32 Standard Cylinder SE32X200SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE32X200SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it integrates an LB foot mounting bracket and a built-in position magnet. The extruded aluminum square barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies tooling clearance and direct machine mounting.
This 32 mm bore unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. The integrated magnet directly supports AirTAC CMSE reed and DMSE electronic sensors for precise position feedback across its 200 mm travel.
| Model | Airtac SE32 Standard Cylinder SE32X200SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 402 N push force needed to drive a cutting head through printed circuit boards, utilizing the 200 mm stroke to accommodate varying panel widths.
Actuates folding arms on a packaging line, where the LB foot mount secures the body and the -S magnet confirms flap position via DMSE electronic sensors.
Moves a dispensing nozzle across a 200 mm axis, relying on the smooth extruded profile barrel for clean, flush mounting in hygienic laboratory environments.
Selecting the SE32X200SLB is ideal when an application requires 402 N of push force at 0.5 MPa within a tight footprint. If your assembly needs less power, stepping down to the 32 mm bore's nearest available smaller neighbor requires confirming specific sub-compact series dimensions, but stepping up to a 40 mm bore provides 628 N of push. This model includes an LB foot mount and a -S magnet for position sensing.
Because this cylinder features a 200 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate side loads, but any extended unsupported travel still necessitates an external guide rail to prevent rod-bearing wear. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so loads will drift if air pressure is lost. For direct retrofits, this profile cylinder is dimensionally interchangeable per ISO 15552 standards.
AirtacDistr lists every SE32 order code with its price on one page at https://airtacdistr.com/products/airtac-se32-iso-air-cylinder
Quick checklist
The 32 mm bore provides a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X200SLB is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint and PT1/8 port size of other ISO 15552 profile cylinders, allowing a direct replacement without modifying your machine plate.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.