Airtac SE32 Standard Cylinder SE32X200SN
The AirTAC Airtac SE32 Standard Cylinder SE32X200SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X200SN
The AirTAC SE32X200SN is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push at 0.5 MPa alongside a 345 N pull, making it well-suited for lighter-duty cycling. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine cells.
This specific configuration includes a built-in magnet for non-contact position sensing with CMSE reed or DMSE electronic switches. It also utilizes an NBR seal for reliable pneumatic operation, while the field-adjustable air cushioning at both ends lets you fine-tune end-of-stroke deceleration to eliminate hard mechanical impacts.
Airtac SE32 Standard Cylinder SE32X200SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X200SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X200SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X200SN Is Used
PCB Depaneling Ejector
Provides the precise 402 N push and 200 mm extension needed to eject singulated circuit boards from a routing fixture without damaging delicate traces.
Small Carton Flap Folder
Cycles at high speeds to fold minor flaps on compact packaging lines, using its adjustable cushioning to softly settle the 200 mm stroke at cycle end.
Lab Sample Dispenser
Actuates a 200 mm stroke to lower a pipetting head into reagent trays, relying on the NBR seal and magnetic DMSE sensors for repeatable fluid handling.
Is the Airtac SE32 Standard Cylinder SE32X200SN the Right Cylinder?
Selecting this 32 mm bore makes sense when your application requires around 402 N of push force at 0.5 MPa. If you need to step down to the smallest available size, note that there is no smaller SE bore, so 32 mm is your baseline. Conversely, if your load demands more authority, stepping up to the 40 mm bore provides a 628 N push. Because this unit carries a 200 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate side loads, though any long unsupported piston rod still warrants an external guide rail to prevent bushing wear. As a standard ISO 15552 cylinder, it serves as a drop-in dimensional replacement for competing profile cylinders, utilizing a PT1/8 port and the S magnet option.
Keep in mind that a standard double-acting cylinder does not hold its position if air pressure is lost or the valve centers; the piston will drift. If your setup requires static load holding without live air, you must integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X200SN FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X200SN is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the standard mounting hardware and PT1/8 port size. The built-in magnet also allows you to directly mount AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X200SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.