Airtac SE32 Standard Cylinder SE32X215S
The AirTAC Airtac SE32 Standard Cylinder SE32X215S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 215mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke215 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X215S
The AirTAC SE32X215S is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and a 215 mm stroke. It delivers 402 N of push force at 0.5 MPa and 563 N at 0.7 MPa, making it well-suited for compact automation tasks. The included -S magnet enables direct position sensing with AirTAC CMSE reed and DMSE electronic switches.
This actuator features a square extruded aluminum barrel without external tie rods, ensuring a flush, corrosion-resistant body that mounts cleanly in tight spaces. The field-adjustable pneumatic cushioning at both ends lets you fine-tune end-of-stroke deceleration to protect payloads, while the standardized ISO 15552 mounting interface guarantees seamless retrofitting.
Airtac SE32 Standard Cylinder SE32X215S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X215S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X215S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X215S Is Used
Lab Automation Dispensing
Drives a precision fluid valve with 402 N of push force, using the built-in magnet and DMSE sensors to confirm exact dosing positions.
PCB Board Clamping
Secures delicate electronics during testing, relying on the adjustable cushion to soften the 215 mm stroke end stops and prevent impact damage.
Small Part Ejection
Ejects lightweight plastic components from a molding fixture, utilizing the compact no-tie-rod profile to fit within a dense machine layout.
Is the Airtac SE32 Standard Cylinder SE32X215S the Right Cylinder?
If you need less force, the next bore down is 25 mm, but stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa, offering a stronger alternative. Because the 215 mm stroke exceeds the 1000 mm maximum standard stroke for this 32 mm bore, this unit is a non-standard, made-to-order configuration. For this stroke length, the 12 mm rod and M10x1.25 thread carry moderate side loads, but an external guide is recommended if the load is heavy or unsupported.
A standard SE cylinder does not hold its position when air is lost or the valve is centered; the piston will drift. If your application requires true load holding without live pressure, consider the BSE rod lock variant. For this specific model, you will need PT1/8 fittings and your preferred ISO 15552 mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X215S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes. The SE32X215S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing ISO 15552 footprints and reuse existing mounting hardware. The -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X215S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.