Airtac SE32 Standard Cylinder SE32X225S
The AirTAC Airtac SE32 Standard Cylinder SE32X225S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke225 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X225S
The AirTAC SE32X225S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation, delivering a 402 N push at 0.5 MPa. Its 225 mm stroke and 32 mm bore hit a sweet spot for lighter-duty machinery where space matters but standard stroke lengths fall short.
Built with a square extruded aluminum barrel, this model eliminates external tie rods to mount flush against frames while resisting corrosion. The built-in magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensors, feeding precise end-of-stroke signals back to your PLC without requiring external brackets.
Airtac SE32 Standard Cylinder SE32X225S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X225S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X225S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X225S Is Used
Lab Automation Dispensing
Drives a 225 mm travel axis for reagent tray indexing, utilizing the 402 N extend force to smoothly shift lightweight cassettes without over-stressing the mechanism.
Carton Flap Folding
Deploys the 32 mm bore to fold small cardboard flaps on a packaging line, relying on the magnetic piston to trigger DMSE sensors for precise fold timing.
Small Part Ejection
Pushes machined plastic parts out of a CNC fixture using the 345 N retract force, taking advantage of the adjustable cushion to prevent scuffing delicate components.
Is the Airtac SE32 Standard Cylinder SE32X225S the Right Cylinder?
Choosing this 32 mm bore makes sense when you need exactly 402 N of push at 0.5 MPa. If your load demands less force, stepping down is not an option as 32 mm is the smallest standard SE size; however, if you need considerably more thrust, the 40 mm bore provides 628 N at 0.5 MPa. Because this cylinder features a 225 mm stroke, the 12 mm rod and M10x1.25 thread should be paired with an external guide to prevent rod-bearing bending under lateral loads.
As a true ISO 15552 profile cylinder, the SE32X225S is dimensionally interchangeable with other ISO 15552 cylinders for straightforward retrofits. It uses a PT1/8 port and adjustable pneumatic cushioning at both ends to soften end stops. Note that a plain SE cylinder will drift if air pressure is lost; if your application must hold a load safely without live pressure, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X225S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X225S adheres strictly to the ISO 15552 / VDMA 24562 mounting interface, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can reuse existing mounting hardware and drop it directly into your fixture.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.