Airtac SE32 Standard Cylinder SE32X230S
The AirTAC Airtac SE32 Standard Cylinder SE32X230S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke230 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X230S
The AirTAC SE32X230S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers 402N of push force at 0.5 MPa alongside a 345N pull force, making it well-suited for lighter-duty automation requiring a 230mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Because this unit includes the -S magnet code, it is fully primed for position sensing using AirTAC CMSE reed or DMSE electronic switches. The integrated sensor grooves on three sides of the body allow flexible switch placement, while field-adjustable pneumatic cushioning at both ends lets you fine-tune end-of-stroke deceleration to protect tooling and reduce impact noise.
Airtac SE32 Standard Cylinder SE32X230S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X230S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X230S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X230S Is Used
PCB Depaneling Router
Provides the 402N push force needed to plunge a routing spindle along a 230mm axis to singulate populated printed circuit boards without stressing adjacent components.
Carton Flap Folder
Drives a mechanical folding arm 230mm to tuck corrugated carton flaps prior to sealing, using adjustable end cushions to softly seat the flaps without crushing the board.
Lab Sample Dispenser
Actuates a 230mm travel nozzle for metering reagents into assay trays, leveraging the built-in -S magnet to trigger DMSE electronic sensors for exact fill positioning.
Is the Airtac SE32 Standard Cylinder SE32X230S the Right Cylinder?
Stepping down to a bore size below 32mm is not available in the standard SE range, but stepping up to the SE40 bore yields a higher 628N push at 0.5 MPa if your application requires greater force. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct drop-in replacement for other ISO 15552 profile cylinders, simplifying retrofits. It features a PT1/8 port, a 12mm rod with an M10x1.25 thread, and uses standard mounting hardware. At 230mm of stroke, the unsupported piston rod is susceptible to bending under lateral loads, so utilizing an external guide bearing is highly recommended to prevent premature wear. Note that this cylinder relies on live air pressure to hold position; it will drift if air is lost, as the cushion only decelerates the piston near stroke end and does not act as a brake.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X230S FAQ
At 0.5 MPa, the SE32X230S generates 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N, with an absolute maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X230S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and body interface as other ISO 15552 profile cylinders, allowing for a seamless drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.