Airtac SE32 Standard Cylinder SE32X245S
The AirTAC Airtac SE32 Standard Cylinder SE32X245S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 245mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke245 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X245S
The AirTAC SE32X245S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Operating at 0.15-1.0 MPa, it delivers a 402 N push force and 345 N pull force at 0.5 MPa. The 32 mm bore utilizes a PT1/8 port and a 12 mm hard-chrome rod with an M10x1.25 thread.
This model features a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. Its square extruded aluminum barrel eliminates external tie rods, providing a flush mounting surface that resists corrosion and simplifies sensor placement along three integrated grooves.
Airtac SE32 Standard Cylinder SE32X245S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X245S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 245 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X245S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×245 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X245S Is Used
PCB Handling
Moves bare circuit boards between inspection stations with 402 N push force, using the built-in magnet for DMSE end-of-stroke confirmation.
Carton Sealing
Actuates small flap folders on carton sealing machinery where the 32 mm bore fits tight clearances and the tie-rod-free profile mounts flush.
Lab Dispensing
Precisely meters fluid valves in analytical equipment, relying on adjustable pneumatic cushions to soften the 245 mm stroke impact.
Is the Airtac SE32 Standard Cylinder SE32X245S the Right Cylinder?
At 245 mm of stroke, this 32 mm bore sits at the smaller end of the SE range. If you need less force, there is no smaller standard SE bore, so stepping up to the SE40X250 gives you a significant jump to 628 N push at 0.5 MPa. Because this stroke exceeds 300 mm, the 12 mm rod experiences higher bending moments under side loads; always use an external guide mechanism to prevent rod-bearing wear. Note that the field-adjustable air cushions at both ends decelerate the piston near stroke end but do not hold the load if air pressure is lost. For position holding without live pressure, consider the BSE rod lock variant. To retrofit, match the 32 mm bore, 245 mm stroke, PT1/8 port, and basic mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X245S FAQ
The SE32X245S generates a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa operating pressure.
Yes, the SE32X245S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware, but ensure your machine controller interfaces with AirTAC CMSE or DMSE sensors via the built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X245S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.