Airtac SE32 Standard Cylinder SE32X25SH
The AirTAC Airtac SE32 Standard Cylinder SE32X25SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X25SH
The AirTAC SE32X25SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. With a 32mm bore and 25mm stroke, it generates 402N of push force at 0.5 MPa and up to 563N at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames.
This specific configuration includes a Viton (FKM) seal rated for temperatures up to 150 C, making it ideal for high-heat applications. The built-in magnet (-S) enables seamless position detection using AirTAC CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both stroke ends allow you to fine-tune deceleration, softening hard impacts during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X25SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X25SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X25SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X25SH Is Used
Injection Mold Ejection
Survives ambient heat near mold plates to eject small plastic parts with 402N of push force over a rapid 25mm stroke.
Heat-Seal Clamping
Viton seals withstand radiated heat from sealing bars while the 25mm stroke rapidly closes and opens packaging jaws.
Lab Oven Handling
The 150 C FKM seal survives hot environments inside enclosure ovens, actuating sample trays with precise 345N pull force.
Is the Airtac SE32 Standard Cylinder SE32X25SH the Right Cylinder?
Selecting the SE32X25SH is optimal when your process requires precise short-stroke actuation under heat stress. If you need less force, the smaller 32mm bore is already the minimum standard size, so stepping down within the SE series is not an option. If your application demands greater thrust, stepping up to the 40mm bore provides 628N of push at 0.5 MPa. Because this is a double-acting cylinder, it cannot hold a load unpowered—air loss causes drift, so add a BSE rod lock for vertical holding. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing footprints using standard mounting hardware and PT1/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X25SH FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force is 563N. The maximum push force is 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s, uses a PT1/8 port, and features a 12mm rod with an M10x1.25 thread.
Yes. The SE32X25SH is dimensionally interchangeable per ISO 15552 standards, meaning it drops into existing footprints and shares standard mounting hardware without modifications. Additionally, its Viton (FKM) seal extends the operating temperature range up to 150 C, making it suitable for high-thermal environments where standard rubber seals would fail.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X25SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.