Airtac SE32 Standard Cylinder SE32X270
The AirTAC Airtac SE32 Standard Cylinder SE32X270 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke270 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X270
The AirTAC SE32X270 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Delivering 402 N of push force at 0.5 MPa, it utilizes a square extruded aluminum barrel without external tie rods. This design not only resists corrosion but allows for flush mounting in tight machine spaces.
This 32mm bore unit features a 270mm stroke and a PT1/8 port. It includes field-adjustable air cushioning at both ends to soften end-of-stroke impacts. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE32 Standard Cylinder SE32X270 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X270 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X270
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X270 Is Used
PCB Router Spindle Clamp
Applies 402 N of push force at 0.5 MPa to secure a printed circuit board routing spindle, utilizing the compact 32mm profile to fit within dense electronics manufacturing cells.
Package Divert Arm
Uses the 270mm stroke to push small parcels off a conveyor belt, relying on the field-adjustable air cushion to prevent harsh impacts that could damage lightweight packaging.
Lab Sample Dispenser
Actuates a fluid dispensing nozzle in automated laboratory equipment, where the smooth extruded barrel and PT1/8 port ensure reliable, low-friction linear motion.
Is the Airtac SE32 Standard Cylinder SE32X270 the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this bore is ideal for light-duty handling. If your application requires less force, the smaller ISO 15552 bores offer lower output, whereas stepping up to the 40mm bore provides a substantial 628 N push at 0.5 MPa for heavier loads. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If position holding without air pressure is required, consider the BSE rod-lock variant. Because this 270mm stroke approaches the 300mm threshold, ensure you use an external guide to prevent rod-bearing bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X270 FAQ
This cylinder provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It features a 12mm rod diameter, an M10x1.25 rod-end thread, and a PT1/8 port.
Yes, the SE32X270 is dimensionally interchangeable per ISO 15552 standards, allowing it to replace other ISO 15552 profile cylinders using existing mounting hardware. However, this specific SKU lacks a built-in magnet, so it will not work with CMSE or DMSE position sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X270
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.