Airtac SE32 Standard Cylinder SE32X270S
The AirTAC Airtac SE32 Standard Cylinder SE32X270S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 270mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke270 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X270S
The AirTAC SE32X270S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force, scaling up to 563 N push at 0.7 MPa. The 32 mm bore utilizes a PT1/8 port and a 12 mm hard-chrome plated rod.
This unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed or DMSE electronic sensors. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant profile that mounts cleanly in tight spaces. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X270S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X270S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X270S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X270S Is Used
PCB Depaneling Router
Utilizes the 270 mm stroke and 402 N push to precisely separate populated printed circuit boards, relying on the -S magnet and DMSE sensor for exact cutting depth positioning.
Small Carton Flap Folder
Actuates folding mechanisms for light cardboard packaging, where the adjustable cushion softens the stroke end to prevent crushing the material at high speeds.
Lab Sample Dispenser
Drives a 32 mm bore dispensing head in analytical equipment, benefiting from the tie-rod-free extruded profile to maximize space efficiency within the machine chassis.
Is the Airtac SE32 Standard Cylinder SE32X270S the Right Cylinder?
The SE32X270S provides 402 N push at 0.5 MPa. If your application requires less force, you cannot step down within the ISO 15552 range, so consider optimizing pressure or examining smaller non-ISO alternatives. If you need more power, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. Because this cylinder has a 270 mm stroke, the unsupported load can induce bending moments on the 12 mm rod bearing; for heavy lateral loads, implement an external guide to prevent premature wear. Remember, a standard SE cylinder drifts when air is lost—use a BSE rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement sharing standard mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X270S FAQ
The SE32X270S generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the adjustable air cushion only decelerates the piston near the stroke end and does not act as a brake. If pressure is lost, the rod will drift. For fail-safe load holding, you need a BSE series rod lock or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X270S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.