Airtac SE32 Standard Cylinder SE32X275S
The AirTAC Airtac SE32 Standard Cylinder SE32X275S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke275 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X275S
The AirTAC SE32X275S is a double-acting single-rod ISO 15552 profile cylinder featuring a 32mm bore and 275mm stroke. It delivers a push force of 402 N at 0.5 MPa and 563 N at 0.7 MPa, making it well-suited for lighter-duty automation tasks. The extruded aluminum square barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both stroke ends allows precise tuning of end-of-stroke deceleration, ensuring smooth stops without harsh impacts.
Airtac SE32 Standard Cylinder SE32X275S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X275S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X275S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X275S Is Used
CNC Tool Changer
Actuates a 402N push at 0.5 MPa to index tool carousels on machining centers, relying on the 275mm stroke to fully clear the spindle area.
Case Ejector
Uses the 12mm hard-chrome rod and 345N pull force at 0.5 MPa to deflect misaligned cartons off a packaging conveyor before the sealing station.
Lab Sample Handler
Leverages the built-in magnet with DMSE electronic sensors to track gripper position across the 275mm stroke for automated test tube routing.
Is the Airtac SE32 Standard Cylinder SE32X275S the Right Cylinder?
With a 402 N push at 0.5 MPa, the SE32X275S fits compact actuation needs. If your application requires less force, stepping down to the 25mm bore is not an option in this series, but if you need more power, moving up to the 40mm bore yields a 628 N push at 0.5 MPa. Because this is a 275mm stroke, the 12mm rod and bearing face potential bending forces under heavy lateral loads; utilizing an external guide rail is strongly recommended to prevent premature wear.
This standard ISO 15552 profile cylinder serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting hardware and port sizes (PT1/8). Remember that a standard SE cylinder does not hold a load if air pressure is lost; for position holding, consider the BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X275S FAQ
The SE32X275S generates a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push of 82 kgf at 1.0 MPa. The port size is PT1/8.
Yes, the SE32X275S is dimensionally interchangeable per ISO 15552 standards. Its profile body and PT1/8 port match standard ISO 15552 mounting hardware, allowing it to serve as a drop-in replacement for other cylinders in this footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X275S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.