Airtac SE32 Standard Cylinder SE32X300S
The AirTAC Airtac SE32 Standard Cylinder SE32X300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke300 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X300S
The AirTAC SE32X300S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. It yields 402 N of push force at 0.5 MPa, scaling to 563 N at 0.7 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine cells.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, preventing hard impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X300S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X300S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X300S Is Used
PCB Handling Escapements
Drives small electronic component escapements with 402 N push at 0.5 MPa, utilizing the 300 mm stroke to reach across conveyor widths.
Packaging Diverter Arms
Actuates lightweight routing flaps on packaging lines, where the flush profile barrel and DMSE electronic sensors ensure compact, tracked routing.
Lab Sample Dispensing
Moves fluid dispensing heads across a 300 mm span, relying on field-adjustable end cushions to soften stops and prevent reagent splashing.
Is the Airtac SE32 Standard Cylinder SE32X300S the Right Cylinder?
Stepping down is not an option as 32 mm is the smallest standard SE bore. If you need greater thrust, the next size up is the 40 mm bore, which provides 628 N of push at 0.5 MPa. For this 300 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate loads, but long unsupported strokes invite rod-bearing bending; integrate an external guide to prevent side-load damage. Remember that a plain SE cylinder drifts if air pressure drops—use a BSE rod lock for strict position holding.
As a true ISO 15552 dimensionally interchangeable cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders. Specify the PT1/8 port, 300 mm stroke, basic mounting, and -S magnet when matching your existing footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X300S FAQ
At 0.5 MPa, the SE32X300S generates 402 N of push force and 345 N of pull force. At 0.7 MPa, push increases to 563 N. The maximum push force is 82 kgf at the 1.0 MPa operating pressure limit.
No, a standard SE cylinder will drift and drop the load if air is exhausted or valve pressure is lost. The adjustable air cushion only decelerates the piston near the end of the stroke; it does not lock the rod. For secure load holding, use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.