Airtac SE32 Standard Cylinder SE32X310S
The AirTAC Airtac SE32 Standard Cylinder SE32X310S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 310mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke310 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X310S
The AirTAC SE32X310S is a double-acting, single-rod ISO 15552 profile cylinder with a 32mm bore and a 310mm non-standard stroke. It generates 402N of push force at 0.5 MPa and includes a built-in magnet for position sensing. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with field-adjustable air cushioning at both ends, the end-of-stroke impact can be precisely tuned to absorb kinetic energy. The integrated -S magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors dropped into the three-side sensor groove. Because the 310mm stroke exceeds the standard 1000mm limit for this bore, it is manufactured as a made-to-order unit.
Airtac SE32 Standard Cylinder SE32X310S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X310S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 310 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X310S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X310S Is Used
PCB Drill Bit Changer
Drives a vertical tool-changing carousel in a PCB drilling machine, using the 310mm stroke to index drill bits and the 402N push force to seat the toolholder.
Bottle Diverter Gate
Actuates a lightweight pneumatic sorting flap on a beverage line, leveraging the 310mm stroke to reach across the conveyor belt and redirect glass bottles.
Lab Sample Tube Ejector
Ejects centrifuge sample racks from a clinical analyzer, using the -S magnet and DMSE sensors to confirm full extension before the gripper retracts.
Is the Airtac SE32 Standard Cylinder SE32X310S the Right Cylinder?
This 32mm bore cylinder provides 402N push at 0.5 MPa. If your application requires less force, stepping down is not an option as this is the smallest ISO 15552 bore. If you need more power, the next size up is the 40mm bore, which provides 628N push at 0.5 MPa. Remember that a plain SE cylinder does not hold its position if air pressure is lost; for load-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting hardware and footprint dimensions.
Because the 310mm stroke is relatively long for a 32mm bore, the 12mm rod and its bearing face bending under side loads. An external guide rail should be used to prevent premature seal wear and piston scoring.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X310S FAQ
At 0.5 MPa, the SE32X310S provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force is 563N. The maximum push force is 82 kgf at 1.0 MPa.
Yes. The SE32X310s is a standard ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. You can reuse your existing FA, LB, or TC mounting brackets and PT1/8 port connections without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X310S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.