Airtac SE32 Standard Cylinder SE32X315
The AirTAC Airtac SE32 Standard Cylinder SE32X315 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 315mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke315 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X315
The AirTAC SE32X315 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 32mm bore and 315mm stroke. Because 315mm exceeds the 1000mm maximum standard stroke for this bore, it is manufactured as a made-to-order unit. It generates 402N of push force at 0.5 MPa and 563N at 0.7 MPa, making it well-suited for compact, lower-force positioning tasks.
The extruded aluminum barrel omits external tie rods, yielding a smooth, flush-mounting body that resists corrosion and simplifies bracket installation. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speed. This specific SKU lacks the -S magnet option, so it does not directly support CMSE or DMSE electronic position sensing without modification.
Airtac SE32 Standard Cylinder SE32X315 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X315 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 315 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X315
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×315 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X315 Is Used
PCB Depaneling Router
Actuates the cutting head on a low-force depaneling router, using the 315mm stroke to traverse the board width while the compact profile saves machine space.
Small Parts Diverter
Sorts lightweight plastic components on a packaging line, where the 402N push force easily deflects parts into secondary lanes without damaging them.
Lab Sample Dispenser
Drives a pipetting head across a 315mm travel path to reach multiple test tube racks, relying on adjustable end cushions to prevent liquid splashing.
Is the Airtac SE32 Standard Cylinder SE32X315 the Right Cylinder?
Choosing this 32mm bore makes sense when your load requires roughly 402N of push at 0.5 MPa. If you need less force, there is no smaller ISO 15552 bore in the AirTAC SE series, so you would look at compact cylinder families. If your application demands more power, stepping up to the 40mm bore yields 628N of push at 0.5 MPa. Because the 315mm stroke is non-standard and exceeds the 1000mm max catalog stroke, expect a made-to-order lead time.
At 315mm of travel, the 12mm rod and its bearing face increased bending moments under side loads; always guide the load externally to prevent rod damage. As a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered, so add a BSE rod lock for fail-safe holding. It serves as a dimensionally interchangeable drop-in replacement for any ISO 15552 cylinder footprint using the PT1/8 port and basic mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X315 FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N of push and 345N of pull. At 0.7 MPa, the push force is 563N. The maximum allowable push force is 82 kgf at 1.0 MPa.
Yes. The SE32X315 is built to the ISO 15552 / VDMA 24562 dimensional standard, meaning it shares the exact mounting footprint, port spacing, and PT1/8 thread size for direct interchangeability with other ISO 15552 profile cylinders without requiring custom brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X315
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.