Airtac SE32 Standard Cylinder SE32X350S
The AirTAC Airtac SE32 Standard Cylinder SE32X350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X350S
The AirTAC SE32X350S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force, utilizing a 32 mm bore and a 350 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush against machine frames while saving valuable space.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a simple screw, softening impacts during high-speed 30-800 mm/s operations. It is a true ISO 15552 interchangeable profile cylinder, ensuring a drop-in fit for standardized mounting hardware.
Airtac SE32 Standard Cylinder SE32X350S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X350S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X350S Is Used
PCB Drill Tool Changer
Cycles a drill head in a PCB routing machine, utilizing the 350 mm stroke to reach across the tool rack and the 402 N push force to seat the tool holder securely.
Small Parts Diverter
Pushes lightweight plastic enclosures off a conveyor belt, relying on the smooth tie-rod-less profile to avoid snagging passing materials during 30-800 mm/s actuation.
Lab Dispense Head
Lowers a fluid dispense nozzle over reagent trays, using the built-in magnet to trigger DMSE electronic sensors for precise fill-level positioning.
Is the Airtac SE32 Standard Cylinder SE32X350S the Right Cylinder?
If your application demands less force, stepping down is not an option as 32 mm is the smallest standard SE bore. If you require greater thrust, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Keep in mind that a plain SE cylinder does not hold its position if air pressure is lost or the valve centers; the piston will drift. For critical load-holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
With a 350 mm stroke, the 12 mm rod and M10x1.25 thread face significant bending moments under side loads. Even though the profile body handles inline forces well, an external guide is strongly recommended to prevent rod-bearing wear over this long unsupported travel distance. This model uses a PT1/8 port and includes the -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X350S FAQ
At 0.5 MPa, the SE32X350S provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X350S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and can serve as a drop-in replacement for other ISO 15552 profile cylinders without altering your mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.