Airtac SE32 Standard Cylinder SE32X350SH
The AirTAC Airtac SE32 Standard Cylinder SE32X350SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X350SH
The AirTAC SE32X350SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 402 N of push force at 0.5 MPa and features a high-temperature FKM (Viton) seal, expanding the operating temperature range up to 150 C for thermal processing equipment. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant footprint that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke position verification. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, effectively absorbing kinetic energy across the 350 mm travel.
Airtac SE32 Standard Cylinder SE32X350SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X350SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X350SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X350SH Is Used
Plastic Injection Mold Extraction
Handles part stripping on small plastic injection molds where the 402 N push force reliably ejects lightweight components without stressing the tooling.
Lab Drying Oven Doors
Ideal for automated drying oven doors in laboratories, leveraging the FKM Viton seal to withstand continuous 150 C ambient heat while cycling the 350 mm stroke.
Pharmaceutical Pouch Forming
Drives the sealing jaw mechanism on pharmaceutical pouch packaging lines, using the integrated magnet to trigger DMSE sensors for precise seal dwell timing.
Is the Airtac SE32 Standard Cylinder SE32X350SH the Right Cylinder?
Generating 402 N of push at 0.5 MPa, this 32 mm bore fits light-duty cycling. If your application requires less force, there is no smaller standard SE bore, so you must look outside the ISO 15552 range. If you need more power, stepping up to the 40 mm bore provides 628 N of push. Keep in mind that a standard SE cylinder will drift and cannot hold a load if air pressure drops; for fail-safe holding, consider the BSE rod lock variant. Because the 350 mm stroke is substantial for a 12 mm rod, side-load bending moments increase significantly; always use an external guide rail to prevent rod-bearing damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X350SH FAQ
At 0.5 MPa, it provides 402 N of push force and 345 N of pull force. At 0.7 MPa, push increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE32X350SH is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint and PT1/8 port size of other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X350SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.