Airtac SE32 Standard Cylinder SE32X364S
The AirTAC Airtac SE32 Standard Cylinder SE32X364S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 364mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke364 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X364S
The AirTAC SE32X364S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact linear actuation. Operating at 0.5 MPa, it generates 402 N of push force and 345 N of pull force, making it well-suited for lighter-duty automation tasks.
This unit includes a built-in magnet for CMSE or DMSE position sensing and features a clean extruded aluminum barrel without external tie rods. The field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting your machinery from harsh impacts.
Airtac SE32 Standard Cylinder SE32X364S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X364S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 364 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X364S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×364 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X364S Is Used
PCB Drill Bit Changer
Provides the precise 402 N extension needed to actuate the tool-changing carousel on a printed circuit board drilling machine.
Package Sorting Diverter
Utilizes its 364 mm stroke to push lightweight cardboard cartons from a main conveyor belt into a secondary packing lane.
Lab Sample Dispenser
Drives the 364 mm travel required to lower a fluid sampling probe into test tubes on an automated clinical analyzer.
Is the Airtac SE32 Standard Cylinder SE32X364S the Right Cylinder?
When sizing this 32 mm bore actuator, note that stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N, while dropping down is not an option as 32 mm is the smallest available SE footprint. Because this model features a 364 mm stroke, the 12 mm rod requires an external guide to prevent rod-bearing bending under side loads. As a standard ISO 15552 cylinder, it serves as a drop-in replacement sharing standard mounting accessories, a PT1/8 port, and the -S magnet configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X364S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and does not act as a brake. If you need to hold a vertical load without live pressure, you must use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X364S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.