Airtac SE32 Standard Cylinder SE32X365S
The AirTAC Airtac SE32 Standard Cylinder SE32X365S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 365mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke365 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X365S
The AirTAC SE32X365S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a square extruded aluminum barrel without external tie rods, making the body highly compact and corrosion-resistant for flush mounting. Delivering 402 N of push force at 0.5 MPa, it is engineered for precise linear motion tasks.
This 32 mm bore unit includes a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for exact position tracking. The field-adjustable air cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed 30-800 mm/s operations.
Airtac SE32 Standard Cylinder SE32X365S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X365S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X365S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X365S Is Used
PCB Router Z-Axis
Drives the vertical Z-axis plunge on a PCB depaneling router, using the 365 mm stroke to clear tall fixtures while applying 402 N of push force to cleanly cut rigid circuit boards.
Package Diverter Arm
Actuates a routing diverter arm on a packaging conveyor, utilizing the 32 mm bore's compact profile and integrated CMSE sensor magnet to confirm divert positions at high cycle rates.
Lab Sample Dispenser
Presses pipette nozzles in an automated lab fluid dispenser, where the adjustable end cushions soften the 365 mm travel stops to protect delicate glass reagent vials from cracking.
Is the Airtac SE32 Standard Cylinder SE32X365S the Right Cylinder?
With a 365 mm stroke, this 32 mm bore cylinder generates 402 N push at 0.5 MPa. If your application requires less force, stepping down is not an option as 32 mm is the smallest standard bore. If you need substantially more power, stepping up to the 40 mm bore provides 628 N push. Remember that a plain SE cylinder does not hold its load when air is lost or the valve is centered; the piston will drift, so a BSE rod lock is required for secure position holding.
Because the 365 mm stroke is relatively long for the 12 mm rod, the risk of side-load bearing bending increases significantly under lateral stress. Always use an external guide to support the load and prevent rod deflection. For retrofitting, this model is dimensionally interchangeable per ISO 15552, uses a PT1/8 port, and shares standard mounting accessories with other ISO 15552 cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X365S FAQ
The SE32X365S provides a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other standard ISO 15552 profile cylinders using the same mounting hardware. However, it does not hold its position when air is lost; the piston drifts, requiring a BSE rod lock for load-holding applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X365S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.