Airtac SE32 Standard Cylinder SE32X380S
The AirTAC Airtac SE32 Standard Cylinder SE32X380S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 380mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke380 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X380S
The AirTAC SE32X380S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers 402 N of push force at 0.5 MPa and utilizes a PT1/8 port. Because the extruded aluminum barrel eliminates external tie rods, the body is less prone to corrosion and mounts flush against machine frames, saving valuable space.
This 380 mm stroke unit includes a built-in magnet (-S) for direct positioning feedback with AirTAC CMSE reed or DMSE electronic sensors. The field-adjustable pneumatic cushioning at both ends allows you to dial in end-of-stroke deceleration, ensuring smooth stops without harsh impacts.
Airtac SE32 Standard Cylinder SE32X380S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X380S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X380S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X380S Is Used
Package Diverters
Provides 402 N of push at 0.5 MPa to actuate routing gates on conveyor lines, using the 380 mm stroke to fully clear passing totes.
PCB Handling
Drives lightweight pick-and-place carriages in electronics assembly, relying on the compact tie-rod-free profile to fit tight cell enclosures.
Lab Sample Sorting
Moves sample racks across testing stations with smooth, adjustable end-cushioning to prevent sudden jolts that could spill liquids.
Is the Airtac SE32 Standard Cylinder SE32X380S the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N of push force. If you need less power, the next size down is the 20 mm bore (not in SE series), but stepping up to the 40 mm bore yields 628 N. Keep in mind a plain SE cylinder drifts if air pressure is lost; for position holding, consider the BSE rod lock variant. For a 380 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate loads, but long unsupported strokes risk rod-bearing bending—always use an external guide to prevent side-load damage. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching the 32 mm bore, 380 mm stroke, PT1/8 port, and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X380S FAQ
The SE32X380S delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Its operating speed ranges from 30-800 mm/s.
Yes. The SE32X380S is dimensionally interchangeable per ISO 15552, matching the 32 mm bore, 380 mm stroke, PT1/8 port, and M10x1.25 rod thread. You can use existing ISO mounting hardware without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X380S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.