Airtac SE32 Standard Cylinder SE32X395S
The AirTAC Airtac SE32 Standard Cylinder SE32X395S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 395mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke395 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X395S
The AirTAC SE32X395S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact linear actuation, delivering 402 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes. The integrated -S magnet enables direct position tracking with AirTAC CMSE reed or DMSE electronic sensors.
This 32 mm bore unit utilizes a PT1/8 port and a 12 mm hard-chrome plated rod to support its 395 mm stroke. Field-adjustable pneumatic cushioning at both end caps allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X395S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X395S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 395 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X395S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×395 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X395S Is Used
PCB Drill Bit Changer
Cycles a tool carousel over 395 mm to swap micro-drills in CNC PCB routing stations, using the 402 N extend force to positively seat the tool holder.
Pharmaceutical Puck Diverter
Actuates a sorting gate on a packaging line to deflect empty pucks, relying on the compact tie-rod-free profile to fit within narrow conveyor frame gaps.
Lab Sample Tray Shuttle
Moves analytical sample trays between testing modules, tracking the full 395 mm travel via DMSE electronic sensors for precise laboratory automation.
Is the Airtac SE32 Standard Cylinder SE32X395S the Right Cylinder?
Selecting the SE32X395S makes sense when your application requires the specific 395 mm travel distance and a lighter force profile. If you need to step down to a smaller bore, the next available option is the 25 mm class (confirm exact 0.5 MPa push from its datasheet). Conversely, if your payload demands greater thrust, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. Because this is a 395 mm stroke, the 12 mm rod and internal guide bearing face increased bending moments under side loads; always incorporate an external linear guide to prevent premature seal wear.
As a true ISO 15552 profile cylinder, this model provides a dimensionally interchangeable footprint for drop-in retrofits alongside other ISO 15552 cylinders. It uses a PT1/8 port, accepts standard mounting accessories, and the -S magnet is already built in for switch mounting. Note that the adjustable air cushion only decelerates the piston near stroke end; it will not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X395S FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE32X395S shares the standardized ISO 15552 mounting interface and dimensions, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It features a PT1/8 port and a built-in magnet for CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X395S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.