Airtac SE32 Standard Cylinder SE32X410S
The AirTAC Airtac SE32 Standard Cylinder SE32X410S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 410mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke410 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X410S
The AirTAC SE32X410S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. At 0.5 MPa, it generates 402 N of push force and 345 N of pull force, making it suitable for lighter-duty actuation. The 410 mm stroke is a non-standard, made-to-order length designed for applications requiring extended travel.
Built with a square extruded aluminum barrel, this model eliminates external tie rods for a flush, corrosion-resistant exterior that mounts cleanly to machine frames. The -S suffix indicates a built-in magnet for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, softening hard stops during high-speed operations.
Airtac SE32 Standard Cylinder SE32X410S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X410S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 410 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X410S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×410 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X410S Is Used
Package Divert Arm
Drives an extended 410 mm routing arm on a packaging conveyor to deflect parcels, utilizing the 402 N push force and built-in DMSE sensor magnet for end-of-travel confirmation.
Lab Sample Dispenser
Actuates a long-travel linear shuttle in automated laboratory testing equipment, where the compact 32 mm profile barrel and adjustable cushions prevent vial splashing at end stops.
Textile Tensioner
Positions a web guide arm in textile machinery, using the 345 N retract force to maintain material tension across a 410 mm span without external tie-rod obstructions.
Is the Airtac SE32 Standard Cylinder SE32X410S the Right Cylinder?
If 402 N of push at 0.5 MPa is insufficient, stepping up to the 40 mm bore yields 628 N of extend force. Conversely, if you need a smaller footprint, there is no smaller standard SE bore, so you would optimize by reducing the stroke. Because this is a plain double-acting cylinder, it will drift if air pressure is lost or a valve centers; use a BSE rod lock or external pilot-operated check valve for fail-safe load holding.
As a true ISO 15552 profile cylinder, the SE32X410S is dimensionally interchangeable with other ISO 15552 cylinders, sharing standardized mounting interfaces like LB foot or FA front flange. The 410 mm stroke exceeds the 32 mm bore's 1000 mm maximum standard stroke limit, classifying it as a non-standard made-to-order stroke. At 410 mm of travel, the 12 mm rod and front bearing are subject to bending moments under side loads; always use an external guide to prevent premature seal wear and rod scoring.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X410S FAQ
The SE32X410S has a 32 mm bore and uses a PT1/8 port. At 0.5 MPa, it provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa.
Yes. The SE32X410S is a true ISO 15552 profile cylinder, meaning its mounting dimensions and interface are standardized. It serves as a drop-in dimensional replacement for other ISO 15552 cylinders, utilizing the same mounting hardware and PT1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X410S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.