Airtac SE32 Standard Cylinder SE32X430S
The AirTAC Airtac SE32 Standard Cylinder SE32X430S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 430mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke430 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X430S
The AirTAC SE32X430S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatic motion. Operating at 0.5 MPa, it provides 402 N of push force and 345 N of pull force, peaking at 82 kgf under 1.0 MPa. The 32 mm bore uses a PT1/8 port and a Ø12 mm hard-chrome rod with an M10x1.25 thread.
This unit features a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration for the 430 mm travel.
Airtac SE32 Standard Cylinder SE32X430S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X430S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 430 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X430S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×430 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X430S Is Used
PCB Drill Stroke
Drives a 430 mm routing axis on printed circuit board drilling machines, using the 402 N push force and built-in magnet for precise DMSE sensor positioning.
Small Part Ejection
Ejects machined aluminum brackets from a fixture, relying on the compact 32 mm profile to fit within tight multi-tool machining centers.
Package Diverting
Actuates a routing arm on a packaging conveyor, where the field-adjustable cushion softens the 430 mm travel at high cycling speeds.
Is the Airtac SE32 Standard Cylinder SE32X430S the Right Cylinder?
The 430 mm stroke on this 32 mm bore exceeds the standard 1000 mm maximum, making it a non-standard, made-to-order configuration. If you need less reach, the 40 mm bore offers 628 N push at 0.5 MPa; for heavier loads, step up to the 50 mm bore providing 982 N. Because the stroke is 430 mm, the Ø12 mm rod is highly susceptible to side-load bending—always use an external guide to prevent bearing wear. As a true ISO 15552 cylinder, it drops into existing ISO 15552 footprints using standard LB or FA mounts. Remember, the adjustable cushion only softens end stops; it does not hold loads. If you need drift prevention on air loss, specify a BSE rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X430S FAQ
At 0.5 MPa, the SE32X430S generates 402 N of push force and 345 N of pull force. At 0.7 MPa, push increases to 563 N, with a maximum push of 82 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE32X430S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and body dimensions as other ISO 15552 profile cylinders. You can swap it directly using your existing FA, LB, or TC mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X430S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.