verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE32 Standard Cylinder SE32X440S

The AirTAC SE32 Standard Cylinder SE32X440S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 440mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke440 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$81.85 $89.35Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE32 stroke, mounting and version on one page All SE32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE32 Standard Cylinder SE32X440S

The AirTAC SE32X440S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a 402 N push force at 0.5 MPa, utilizing a 32 mm bore and a 440 mm stroke. The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant body that mounts flush in tight machine envelopes.

This specific unit includes a built-in magnet (-S) for direct switching with AirTAC CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, absorbing kinetic energy smoothly rather than relying on a fixed rubber bumper.

Airtac SE32 Standard Cylinder SE32X440S Technical Specifications

ModelAirtac SE32 Standard Cylinder SE32X440S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke440 mm
Acting typeDouble acting
Port sizePT1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE32 Standard Cylinder SE32X440S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
32Bore size in mm.
×440Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE32 Standard Cylinder SE32X440S Is Used

precision_manufacturing

PCB Drill Spindle Gating

Uses the 402 N extend force to position safety covers over high-speed PCB drilling spindles, fitting neatly into compact electronics manufacturing cells.

conveyor_belt

Small Parts Diverter

The 440 mm stroke pushes lightweight plastic trays across a packaging conveyor, while the -S magnet confirms full extension for the PLC.

science

Lab Sample Ejection

Ejects processed vial racks from centrifuge bays, where the smooth tie-rod-free barrel prevents dust accumulation and eases washdown.

Is the Airtac SE32 Standard Cylinder SE32X440S the Right Cylinder?

At 402 N push, this 32 mm bore is ideal for light-duty actuation. If your assembly requires less force, there is no smaller standard ISO 15552 bore in this series. If you need more power, stepping up to the 40 mm bore increases your 0.5 MPa push to 628 N. Because the 440 mm stroke is substantial for a Ø12 mm rod, external guides are recommended to prevent rod-bearing bending under side loads.

For retrofitting, match the 32 mm bore, 440 mm stroke, PT1/8 port, and basic mounting interface. The integrated -S magnet enables direct CMSE or DMSE sensor placement. Remember that a standard SE cylinder drifts when air is lost; use a BSE variant if the load must be mechanically locked.

AirtacDistr lists every SE32 order code with its price on one page at https://airtacdistr.com/products/airtac-se32-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE32 Standard Cylinder SE32X440S FAQ

This cylinder provides a push force of 402 N and pull force of 345 N at 0.5 MPa, a push of 563 N at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.

Yes, the SE32X440S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 cylinders, matching the 32 mm bore, 440 mm stroke, PT1/8 port, and mounting dimensions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE32 Standard Cylinder SE32X440S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE32X440S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.