Airtac SE32 Standard Cylinder SE32X450SLB
The AirTAC Airtac SE32 Standard Cylinder SE32X450SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke450 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X450SLB
The AirTAC SE32X450SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields 402 N push and 345 N pull at 0.5 MPa, utilizing a 32 mm bore and 450 mm stroke.
The extruded aluminum barrel eliminates external tie rods, offering a flush, corrosion-resistant profile that simplifies mounting. Equipped with an LB foot bracket and a built-in magnet, it supports CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
Airtac SE32 Standard Cylinder SE32X450SLB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X450SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X450SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X450SLB Is Used
PCB Depaneling Router
Drives the cutting head across 450 mm to singulate populated circuit boards, using the 402 N push force to maintain steady router bit feed rates.
Pallet Diverter Gate
Actuates a 450 mm routing arm to redirect small product carriers between parallel conveyor lines without requiring a bulky actuator footprint.
Lab Sample Dispenser
Extends a pipetting nozzle over a 450 mm travel distance to reach multiple test tube racks, relying on the LB foot mount for stable vertical positioning.
Is the Airtac SE32 Standard Cylinder SE32X450SLB the Right Cylinder?
For lower force needs, step down to the SE25 bore (if available) or optimize your pressure; for higher loads, step up to the SE40 bore which provides 628 N push at 0.5 MPa. The 450 mm stroke exceeds 300 mm, so an external guide is recommended to prevent rod-bearing bending under side loads. This cylinder serves as a drop-in ISO 15552 replacement, matching the 32 mm bore, 450 mm stroke, PT1/8 port, LB mounting, and -S magnet specifications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X450SLB FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X450SLB is dimensionally interchangeable per ISO 15552. It shares the standardized 32 mm bore, 450 mm stroke, PT1/8 port, and LB mounting footprint, allowing a direct retrofit without major redesign.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X450SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.