Airtac SE32 Standard Cylinder SE32X470S
The AirTAC Airtac SE32 Standard Cylinder SE32X470S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 470mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke470 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X470S
The AirTAC SE32X470S is a double-acting single-rod ISO 15552 profile cylinder with a 32 mm bore and 470 mm stroke. It delivers 402 N of push force at 0.5 MPa, utilizing a PT1/8 port and a 12 mm hard-chrome rod. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes.
Because this unit includes a built-in magnet (S code), it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing along the three integrated sensor grooves. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X470S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X470S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X470S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X470S Is Used
PCB Depaneling Router
Provides the 402 N push at 0.5 MPa needed to drive a routing spindle along a 470 mm axis, cleanly separating composite circuit boards without stressing the substrate.
Package Divert Arm
Uses the 470 mm stroke to extend a diverter arm across a narrow conveyor belt, relying on the -S magnet and DMSE sensors to confirm divert positioning.
Lab Sample Dispenser
Actuates a 470 mm travel pipetting head, using the adjustable end cushions to prevent liquid splashing by softly decelerating the carriage at stroke end.
Is the Airtac SE32 Standard Cylinder SE32X470S the Right Cylinder?
At 0.5 MPa, this 32 mm bore generates 402 N of push force. If your payload requires less thrust, stepping down is not an option as 32 mm is the smallest standard SE bore. If you need substantially more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder relies on live air pressure to hold a load; if air is lost, the piston will drift, so a BSE rod lock variant is necessary for fail-safe holding.
With a 470 mm stroke, the 12 mm rod and its bearing are subject to bending moments under lateral loads. For applications pushing heavy off-center weights, add an external guide rail to prevent rod wear and premature seal failure. To retrofit this into an existing fixture, match the 470 mm stroke, PT1/8 port, and standard ISO 15552 mounting accessories like FA front flanges.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X470S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X470S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface dimensions as other standard profile cylinders. The built-in magnet also allows seamless integration with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X470S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.