Airtac SE32 Standard Cylinder SE32X500H
The AirTAC Airtac SE32 Standard Cylinder SE32X500H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X500H
The AirTAC SE32X500H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers 402 N of push force at 0.5 MPa and features a robust 32 mm bore paired with a 500 mm stroke. The integrated FKM (Viton) seal expands the operating temperature range up to 150 C, making it highly reliable in thermally aggressive environments where standard elastomers would quickly degrade.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush into tight machinery spaces. The unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the 12 mm rod smoothly near the stroke limits. Because this specific SKU lacks the -S magnet code, it is not equipped for integrated CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X500H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X500H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X500H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X500H Is Used
Shrink Wrap Tunnel Ejection
Handles the 500 mm extraction stroke to push packaged goods out of 150 C shrink-wrap tunnels, utilizing the FKM seal to survive ambient radiated heat.
Plastic Molding Trim Press
Provides 402 N of push at 0.5 MPa to actuate trimming cutters on injection molding lines, where the adjustable cushion absorbs end-of-stroke impact at speed.
Hot End Conveyor Divert
Gates or diverts molded parts on a high-temperature conveyor, relying on the no-tie-rod profile to mount flush without snagging passing components.
Is the Airtac SE32 Standard Cylinder SE32X500H the Right Cylinder?
With a 402 N push at 0.5 MPa, this 32 mm bore sits at the compact end of the SE spectrum. If your application requires less force, there is no smaller standard SE bore, but if you need to step up to handle heavier loads, the 40 mm bore provides 628 N of push at 0.5 MPa. At 500 mm of stroke, the unsupported piston rod is highly susceptible to bending under side loads; utilizing an external guide is strongly recommended to prevent premature rod-bearing wear.
This cylinder serves as a drop-in replacement for any ISO 15552 cylinder, matching standard mounting dimensions and PT1/8 ports. Remember that a standard double-acting cylinder drifts when air pressure is lost or a valve is centered; if your process requires true position holding, consider the BSE rod lock variant. To retrofit this exact unit, specify the 32 mm bore, 500 mm stroke, FKM high-temperature seal, and your required ISO mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X500H FAQ
The SE32X500H generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. Equipped with an FKM Viton seal, its operating temperature range extends to 150 C.
No, the SE32X500H is a standard double-acting cylinder. The adjustable air cushion at both ends only decelerates the piston near the stroke end; it does not act as a brake. If you need to hold a load without live pressure, use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X500H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.