Airtac SE32 Standard Cylinder SE32X500SLB
The AirTAC Airtac SE32 Standard Cylinder SE32X500SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke500 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X500SLB
The AirTAC SE32X500SLB is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 32mm bore and a 500mm stroke, generating 402 N of push force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes an LB foot mounting bracket for rigid base anchoring and a built-in magnetic piston (-S) for position detection. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic sensors dropped into the side grooves. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speed.
Airtac SE32 Standard Cylinder SE32X500SLB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X500SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X500SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X500SLB Is Used
Carton Diverter Arm
Uses the 500mm stroke to push corrugated cartons off a main packaging line onto a secondary spur conveyor, relying on the 402 N push force to overcome box friction.
Small Parts Ejector
Ejects lightweight aluminum machined components from a CNC fixture, utilizing the LB foot mount to stabilize the cylinder against the machine bed during rapid retraction.
Lab Sample Indexer
Advances a sample tray through a testing sequence, with the built-in magnet triggering DMSE electronic sensors to confirm precise 500mm full-stroke positioning.
Is the Airtac SE32 Standard Cylinder SE32X500SLB the Right Cylinder?
Selecting this 32mm bore yields 402 N push and 345 N pull at 0.5 MPa. If your application requires less force, you must step down to a smaller bore, but as the smallest standard ISO 15552 size, 32mm is the entry point. If you need substantially more thrust, step up to the 40mm bore, which provides 628 N push at 0.5 MPa. This model uses a PT1/8 port and an LB foot mount.
Because this unit features a 500mm stroke, the 12mm piston rod experiences increased bending moments under side loads; an external guide mechanism is recommended to prevent rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X500SLB FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402 N push and 345 N pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X500SLB is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, maintaining the same mounting and port dimensions, though you must retain the LB foot mounting accessory.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X500SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.