Airtac SE32 Standard Cylinder SE32X510S
The AirTAC Airtac SE32 Standard Cylinder SE32X510S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 510mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke510 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X510S
The AirTAC SE32X510S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields 402 N of push force at 0.5 MPa and features a 510 mm stroke. Because this stroke exceeds the standard 500 mm catalog step, it is supplied as a non-standard made-to-order unit. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
This specific unit includes a built-in magnet (-S) for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. The integrated sensor grooves run along three sides of the body, allowing you to slot switches anywhere along the 510 mm travel. It also carries field-adjustable air cushioning at both ends, letting technicians dial in end-of-stroke deceleration via a set screw to prevent hard impacts at operating speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X510S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X510S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 510 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X510S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×510 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X510S Is Used
Small Parts Ejection
Uses the 402 N push at 0.5 MPa to knock stamped metal small parts out of a die-press bed over a 510 mm travel distance.
Sorting Diverter
Pushes lightweight cardboard cartons across a packaging conveyor belt, utilizing the 510 mm stroke to bridge the gap between parallel lanes.
Lab Sample Dispenser
Moves fluid dispensing heads along a 510 mm axis into test tube racks, benefiting from the smooth tie-rod-free profile that resists chemical washdown.
Is the Airtac SE32 Standard Cylinder SE32X510S the Right Cylinder?
Selecting this 32 mm bore provides 402 N push and 345 N pull at 0.5 MPa. If your assembly requires less force, stepping down is not an option since 32 mm is the smallest standard SE size; you would instead look at smaller AirTAC series like the SU or SI. If you need more power, stepping up to the 40 mm bore raises push force to 628 N at 0.5 MPa. Keep in mind a plain SE cylinder will drift and cannot hold a load if air pressure drops; for fail-safe holding, specify the BSE rod-lock variant.
For a drop-in replacement, match the 32 mm bore, 510 mm stroke, PT1/8 port, and basic mounting interface to any ISO 15552 cylinder. Because the 510 mm stroke is relatively long for the 12 mm rod, the unsupported piston is susceptible to rod-bearing bending under lateral stress. For this length, you should incorporate an external guide rail to prevent side-load wear and seal damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X510S FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. At 0.7 MPa, push increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa. The 510 mm stroke is a non-standard made-to-order length, as the standard catalog maximum for this bore is 1000 mm.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting footprint, making it dimensionally interchangeable with other ISO 15552 profile cylinders. It features field-adjustable air cushioning at both ends, which decelerates the piston near the stroke end via a needle screw; it is a deceleration device, not a mechanical lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X510S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.