Airtac SE32 Standard Cylinder SE32X530
The AirTAC Airtac SE32 Standard Cylinder SE32X530 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 530mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke530 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X530
The AirTAC SE32X530 is a double-acting single-rod profile cylinder delivering 402 N push at 0.5 MPa across a 530 mm stroke. Built to the ISO 15552 interface, its square extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This SKU ships without a piston magnet, meaning position sensing is not supported out of the box. Field-adjustable pneumatic cushioning at both ends lets you tune end-of-stroke deceleration via a setscrew, softening impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X530 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X530 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 530 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X530
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×530 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X530 Is Used
Divert Gate Actuation
Drives a 530 mm travel diverting flap on a packaging conveyor, using its 402 N push at 0.5 MPa to reliably reroute light cartons between sorting lanes.
Print Head Positioning
Shifts an inkjet print head assembly along a 530 mm axis on a corrugated box printer, where the compact tie-rod-free profile allows flush side mounting.
Lab Sample Ejection
Extends 530 mm to eject prepared test tube racks from an automated centrifuge loading station, utilizing adjustable cushions to soften stops at high cycle rates.
Is the Airtac SE32 Standard Cylinder SE32X530 the Right Cylinder?
When sizing this 32 mm bore, step down is not an option as this is the smallest standard SE size. If you need more force, stepping up to the 50 mm bore yields 982 N push at 0.5 MPa. For this 530 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate loads, but an external guide is strongly recommended to prevent rod-bearing bending under side loads. As a standard ISO 15552 cylinder, it serves as a drop-in replacement sharing identical mounting dimensions with other ISO 15552 profile cylinders. Note that a plain SE does not hold its load when air is lost; use a BSE rod lock for static holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X530 FAQ
At 0.5 MPa it provides 402 N push and 345 N pull. At 0.7 MPa push increases to 563 N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE32X530 SKU is configured without a built-in piston magnet, so it does not support AirTAC CMSE reed or DMSE electronic sensors. If position detection is required, select the SE32X530-S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X530
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.