Airtac SE32 Standard Cylinder SE32X570S
The AirTAC Airtac SE32 Standard Cylinder SE32X570S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 570mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke570 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X570S
The AirTAC SE32X570S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact linear actuation. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force, scaling to a maximum output of 82 kgf at 1.0 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
This 32 mm bore unit includes a built-in magnet for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. Field-adjustable air cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 30-800 mm/s.
Airtac SE32 Standard Cylinder SE32X570S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X570S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X570S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X570S Is Used
Lab Dispenser Positioning
Drives a 570 mm travel axis to move reagent trays in automated medical diagnostic equipment, utilizing the 32 mm bore's 402 N push to slide lightweight carriages smoothly.
PCB Shuttle Transfer
Actuates the extended 570 mm stroke to shuttle bare printed circuit boards between etching and inspection stations, relying on the compact tie-rod-free profile to fit dense electronics manufacturing cells.
Film Roll Tensioning
Maintains precise dancer-arm positioning on a vertical packaging film unwind stand, using the integrated magnet and DMSE sensors to confirm material feed loops.
Is the Airtac SE32 Standard Cylinder SE32X570S the Right Cylinder?
Selecting this 570 mm stroke model provides a PT1/8 port and a Ø12 mm rod, making it suitable for lighter-duty positioning where 402 N of thrust at 0.5 MPa is sufficient. If your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE bore. Conversely, if you need more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because this cylinder utilizes a 570 mm stroke, the extended rod is subject to bending under lateral loads; an external guide rail should be fitted to prevent rod-bearing wear. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for competing ISO 15552 cylinders, sharing standard mounting accessories and a 27 mm cushion length.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X570S FAQ
The 32 mm bore generates a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the SE32X570S is a standard double-acting cylinder and will drift if air is exhausted or valve pressure is lost. The adjustable air cushion only decelerates the piston near the stroke ends and does not function as a locking mechanism. For load-holding, consider a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X570S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.