Airtac SE32 Standard Cylinder SE32X580S
The AirTAC Airtac SE32 Standard Cylinder SE32X580S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 580mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke580 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X580S
The AirTAC SE32X580S is a double-acting single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, operating within a 30-800 mm/s speed range. The 580 mm stroke is a standard extended length for this 32 mm bore, ensuring smooth operation over long travel distances.
This unit includes a built-in magnet (-S) compatible with AirTAC CMSE reed and DMSE electronic sensors for exact position detection. The extruded aluminum barrel eliminates external tie rods, providing a clean, corrosion-resistant profile that mounts flush, while the field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration for fast cycling.
Airtac SE32 Standard Cylinder SE32X580S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X580S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 580 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X580S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×580 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X580S Is Used
Package Sorting Diverter
Uses the 580 mm stroke to push lightweight parcels between sorting lanes on a high-speed distribution conveyor, relying on the compact profile to fit within tight conveyor frames.
PCB Shuttle Conveyor
Actuates a 580 mm transfer shuttle moving unpopulated PCB panels between pick-and-place machines, using CMSE sensors for precise end-position signaling.
Lab Sample Transport
Extends 580 mm to move sample racks between testing stations in analytical equipment, where the smooth deceleration of the adjustable cushion protects fragile glassware.
Is the Airtac SE32 Standard Cylinder SE32X580S the Right Cylinder?
When sizing this actuator, consider stepping up to the 40 mm bore if you need more thrust, as it provides 628 N of push at 0.5 MPa compared to this 32 mm bore's 402 N. Conversely, if your application requires less force, there is no smaller standard ISO 15552 bore, making the 32 mm the most compact option available. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to drop it into existing foot (LB) or flange (FA) mounts without redesigning the machine.
Because the 580 mm stroke creates a long unsupported piston rod extension, you must account for rod-bearing bending and potential side loads. For long-travel configurations, adding an external guide rail prevents premature seal wear and binding. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold a load if air pressure is lost. If your machine requires absolute position holding during an air loss or valve centering, pair this cylinder with an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X580S FAQ
The SE32X580S has a 32 mm bore and uses a PT1/8 port. It generates 402 N of push force and 345 N of pull force at 0.5 MPa, 563 N of push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable with standard ISO 15552 cylinders and shares standard mounting interfaces. The built-in -S magnet works specifically with AirTAC CMSE (reed) and DMSE (electronic) sensors for drop-in position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X580S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.