Airtac SE32 Standard Cylinder SE32X610S
The AirTAC Airtac SE32 Standard Cylinder SE32X610S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 610mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke610 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X610S
The AirTAC SE32X610S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 402 N and a pull force of 345 N at 0.5 MPa. Its 32 mm bore utilizes a PT1/8 port and a 12 mm hard-chrome piston rod. Because the 610 mm stroke exceeds the standard maximum of 1000 mm for this bore, this configuration is supplied as a non-standard, made-to-order unit.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Equipped with a built-in magnet (-S), the cylinder supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, protecting the mechanism during high-speed 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X610S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X610S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X610S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X610S Is Used
Packaging Line Diverter
Uses the 610 mm stroke and 402 N push force to extend diverter arms across a 600 mm conveyor belt, routing cardboard cartons into secondary packaging lanes at speeds up to 800 mm/s.
Lab Sample Indexing
Moves sample trays between testing stations in automated laboratory diagnostics equipment, relying on the compact tie-rod-free profile to fit within tight machine enclosures.
Light-Duty Ejection
Ejects small plastic totes from storage shelving in goods-to-picker systems, using the built-in magnet and DMSE electronic sensors to confirm full ejection position.
Is the Airtac SE32 Standard Cylinder SE32X610S the Right Cylinder?
This 32 mm bore is the smallest in the SE family; if your application requires less force you must drop out of the series, but if you need more power, stepping up to the 40 mm bore yields a 628 N push at 0.5 MPa. The 610 mm stroke requires careful attention to side load: because the 12 mm rod has an extended unsupported length, bending moments on the rod bearing are amplified. An external guide mechanism should be used to prevent premature seal wear and rod deflection. As a standard ISO 15552 profile cylinder, it provides drop-in dimensional interchangeability for retrofits, requiring only the PT1/8 porting and your chosen mounting hardware. Note that the adjustable end cushions only decelerate the piston near stroke end; they do not lock or hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X610S FAQ
At 0.5 MPa operating pressure, the SE32X610S generates a push force of 402 N and a pull force of 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operated at the 1.0 MPa pressure limit.
No, the SE32X610S is a double-acting cylinder and cannot hold a load without live air pressure. The adjustable air cushions at both ends only decelerate the piston near the stroke ends; they do not function as a locking mechanism. For position holding, consider a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X610S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.