Airtac SE32 Standard Cylinder SE32X750S
The AirTAC Airtac SE32 Standard Cylinder SE32X750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke750 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X750S
The AirTAC SE32X750S is a double-acting single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers 402 N of push force at 0.5 MPa and features a 750 mm stroke, making it well-suited for extended travel requirements. The extruded aluminum barrel omits external tie rods, yielding a highly compact footprint that resists corrosion and mounts flush in space-constrained machinery.
This specific configuration includes a built-in magnet (-S) for direct integration with AirTAC CMSE reed and DMSE electronic position sensors. The integrated sensor grooves on three sides of the body allow flexible switch placement along the stroke. Furthermore, the field-adjustable air cushioning at both ends can be precisely tuned via a setscrew to smoothly decelerate the piston near the end of its 750 mm travel.
Airtac SE32 Standard Cylinder SE32X750S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X750S Is Used
Packaging Conveyor Diverters
Drives long-travel diverter arms on packaging conveyors where the 750 mm stroke repositions product lanes and the 402 N push handles lightweight cardboard routing reliably.
CNC Tool Change Arms
Actuates multi-position tool change arms in machining centers, using the built-in magnet with DMSE sensors to confirm full extension across the 750 mm travel path.
Lab Sample Transport
Moves sample racks between testing stations in automated laboratory equipment, benefiting from the smooth adjustable air cushions to protect delicate glassware at stroke ends.
Is the Airtac SE32 Standard Cylinder SE32X750S the Right Cylinder?
When sizing this unit, note that the 32 mm bore provides 402 N push at 0.5 MPa. Stepping up to the 40 mm bore increases that push to 628 N for heavier payloads, while dropping to a non-standard micro-bore would significantly reduce output. Because the 750 mm stroke is substantial, the 12 mm rod and M10x1.25 thread will experience bending moments under high side loads; an external guide bearing is strongly recommended to prevent rod deformation over this extended length. As a true ISO 15552 cylinder, it serves as a drop-in replacement for any standard 32 mm bore profile cylinder with a PT1/8 port and 750 mm stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X750S FAQ
The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. The pneumatic port size is PT1/8.
No, the SE32X750S is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod. For true position holding, consider an external rod lock or the AirTAC BSE series.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.