Airtac SE32 Standard Cylinder SE32X75SH
The AirTAC Airtac SE32 Standard Cylinder SE32X75SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X75SH
The AirTAC SE32X75SH is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and 75 mm stroke. It yields 402 N of push force at 0.5 MPa and uses a PT1/8 port. Equipped with a Viton (FKM) seal, it handles wider operating temperatures up to 150 C for thermal stress environments.
Its square extruded aluminum barrel removes external tie rods, yielding a flush body that resists corrosion and simplifies mounting. The integrated magnet supports CMSE and DMSE position sensing, while the field-adjustable air cushioning at both ends lets you precisely dial in end-of-stroke deceleration.
Airtac SE32 Standard Cylinder SE32X75SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X75SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X75SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X75SH Is Used
Lab Oven Door Actuation
Handles 75mm stroke and 402N push while the FKM Viton seal survives 150C ambient heat inside thermal cycling chambers.
Injection Mold Ejection
Uses the integrated magnet with a DMSE sensor to confirm part ejection, dropping directly into ISO 15552 tooling footprints.
Heat Shrink Clamping
Secures film webs during shrink-wrap sealing where standard NBR seals would degrade from sustained high temperatures.
Is the Airtac SE32 Standard Cylinder SE32X75SH the Right Cylinder?
Stepping down is rarely an option as 32 mm is the smallest standard SE bore, but stepping up to the 40 mm bore yields 628 N push at 0.5 MPa if your load demands more thrust. As a standard double-acting cylinder, this SE model will drift if air pressure is lost or a valve centers; it cannot hold a load independently, so a BSE rod lock is required for positive holding.
For a drop-in retrofit, match the 32 mm bore, 75 mm stroke, PT1/8 port, and basic mounting interface to any ISO 15552 cylinder. The included -S magnet and FKM seal make it ideal for high-temperature sensing applications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X75SH FAQ
At 0.5 MPa it provides 402 N push and 345 N pull, increasing to 563 N push at 0.7 MPa, with a maximum push of 82 kgf at 1.0 MPa. The H seal option uses FKM Viton, extending the operating temperature range from -20 to 150 C.
Yes, the SE32X75SH is dimensionally interchangeable per ISO 15552. You can drop it into existing ISO 15552 mounting hardware using the 32mm bore, 75mm stroke, and PT1/8 port without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X75SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.