Airtac SE32 Standard Cylinder SE32X900S
The AirTAC Airtac SE32 Standard Cylinder SE32X900S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke900 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X900S
The AirTAC SE32X900S is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-reach automation. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force. Its clean, square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 900 mm stroke configuration is a made-to-order unit exceeding the 1000 mm standard maximum for the 32 mm bore, making it ideal for specialized extended-travel tasks. The integrated -S magnet supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while field-adjustable pneumatic cushioning at both ends softens impact at high cycling speeds.
Airtac SE32 Standard Cylinder SE32X900S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X900S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X900S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X900S Is Used
Carton Push-Off Station
Utilizing the 900 mm stroke and 402 N push force, this cylinder ejects packaged cardboard cartons from a wide-belt conveyor into a secondary packaging chute over an extended distance.
Lab Sample Dispenser
The flush extruded profile and built-in DMSE sensor compatibility make it ideal for moving sample trays across large laboratory workbenches where precise, long-travel positioning is required.
Pallet Diverting Arm
Mounted on a roller conveyor, the extended 900 mm reach pushes light pallets or tote bins into side-lane sorting buffers, relying on the adjustable cushion to soften the end-of-stroke stop.
Is the Airtac SE32 Standard Cylinder SE32X900S the Right Cylinder?
Stepping down from this 32 mm bore is not an option as it is the smallest available ISO 15552 size in the SE range. If your application requires greater force, the next bore up is 40 mm, which provides 628 N of push at 0.5 MPa. Because the 900 mm stroke is non-standard and highly extended, the 12 mm rod is susceptible to bending under side loads; always utilize an external guide rail to prevent premature rod-bearing wear.
As a true ISO 15552 cylinder, the SE32X900S is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware like LB foot brackets or FA front flanges during retrofits. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X900S FAQ
The SE32X900S generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operating at the maximum 1.0 MPa pressure.
Yes, the SE32X900S is dimensionally interchangeable with any cylinder built to the ISO 15552 / VDMA 24562 standard. You can drop it into existing mounting footprints and use your existing PT1/8 port and standard mounting accessories without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X900S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.