verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X350-100S

The AirTAC SEJ Adjustable Cylinder SEJ50X350-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 250–350mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke350 mm
  • Adjust window100 mm
  • Effective stroke250–350 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$138.61 $146.11Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X350-100S

The AirTAC SEJ50X350-100S is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window, letting you dial the retract end from 250 mm up to 350 mm. A rod exits both ends, creating identical annular areas so the drive force is equal in both directions at 825 N each way at 0.5 MPa. The rear back-rod stop screw sets the exact end position, which you lock down after commissioning.

It features a Ø20 mm rod, PT1/4 port, M16x1.5 rod thread, and 30 mm adjustable air cushions at both ends to decelerate the load near stroke extremes. This standard extruded-aluminum ISO 15552 barrel omits external tie rods, and the -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.

Airtac SEJ Adjustable Cylinder SEJ50X350-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X350-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke350 mm
Adjustment window100 mm (250–350 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X350-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×350Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X350-100S Is Used

precision_manufacturing

Packaging Flap Folding

Dial the retract stop from 250 to 350 mm to fold varying carton heights on a packaging line, utilizing the equal 825 N both-way force to securely crease flaps without retooling cylinders.

swap_horiz

Conveyor Diverter Changeover

Adjust the actuation arm position on a conveyor diverter to handle different product widths, fine-tuning the 100 mm window on the machine to match the stop location precisely.

Is the Airtac SEJ Adjustable Cylinder SEJ50X350-100S the Right Cylinder?

Verify the 100 mm adjustment window covers your required 250-350 mm travel range for part changeover or trial positioning. If you do not need variable stops, a fixed-stroke SED50 saves complexity. Stepping the bore down to 40 mm drops the both-way force to 528 N at 0.5 MPa, while stepping up to 63 mm raises it to 1402 N at 0.5 MPa.

For this 350 mm stroke, guide external loads to prevent rod side-loading and premature wear. Note that a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, so specify a BSED or external rod lock for fail-safe holding. Match ISO 15552 replacements by bore, stroke, window, PT port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X350-100S FAQ

The 100 mm window lets you mechanically adjust the retract stroke from 250 mm up to 350 mm. Because it is a double-rod cylinder, the output force is identical both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

No. The adjustable air cushions and the back-rod stop screw only set the mechanical end and decelerate the load near stroke extremes; they do not act as a brake. For fail-safe position holding on air loss, you need a BSED double-rod lock or an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X350-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X350-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.