
The AirTAC SEJ Adjustable Cylinder SEJ50X350-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 330–350mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X350-20S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, ensuring identical annulus area for equal force and speed in both directions. It delivers 825 N of thrust and pull each way at 0.5 MPa. The rear rod features a mechanical stop screw, allowing you to dial the retract stroke down by 20 mm for an effective range of 330 to 350 mm.
This extruded aluminum barrel omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the piston near stroke limits. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position detection. The PT1/4 ports and M16x1.5 rod-end thread match standard 50 mm bore ISO 15552 dimensions.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X350-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 350 mm |
| Adjustment window | 20 mm (330–350 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to position sheet metal precisely against the 825 N both-way stop force, adjusting for different flange depths without changing cylinders.
Fine-tune the 330-350 mm effective stroke during format size changes on a carton sealer, using the equal both-way force to push and pull folding mechanisms.
Set the exact retract end position during commissioning of an adhesive dispenser, locking the back-rod stop screw once the optimal 0.7 MPa cycle distance is found.
This 50 mm bore model provides 825 N both-way force at 0.5 MPa. If your application requires less force, the 40 mm bore offers 528 N both-way at 0.5 MPa. For heavier variable-stop demands, step up to the 63 mm bore, which provides 1402 N both-way at 0.5 MPa. The 20 mm adjustment window is ideal for fine-tuning end positions during machine commissioning or matching varying part heights without swapping hardware.
Because the 350 mm stroke exceeds 300 mm, use external guides to prevent side-loading and protect the rod seals. The adjustable air cushion and mechanical stop screw set the end position but do not hold the load on air loss; for fail-safe holding, consider a BSED or an external rod lock. If you need a fixed retract position without the adjustment mechanism, a standard SED cylinder is sufficient. When replacing an ISO 15552 unit, verify the 50 mm bore, 350 mm nominal stroke, 20 mm window, PT1/4 ports, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20 mm. This gives an effective stroke range of 330 to 350 mm. You lock the screw after setting the exact end position, which is ideal for machine commissioning.
Because a rod exits both ends, the effective area is identical in both directions. It outputs 825 N both ways at 0.5 MPa, 1154 N both ways at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.