
The AirTAC SEJ Adjustable Cylinder SEJ50X350-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 275–350mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X350-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75mm adjustable stroke window, allowing you to dial the retract end anywhere from 275mm to 350mm. A rod exits both ends, yielding identical annulus areas and an equal force of 825 N each way at 0.5 MPa. The rear rod features a mechanical stop screw that you lock after setting the exact end position during machine commissioning.
This 50mm bore unit includes a built-in magnet for CMSE or DMSE sensors and provides field-adjustable air cushions at both ends to decelerate the payload. It operates at speeds from 30-800 mm/s and uses a PT1/4 port with an M16x1.5 rod thread. Because the total stroke is 350mm, external guide rails are recommended to prevent side-load shaft deflection.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X350-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 350 mm |
| Adjustment window | 75 mm (275–350 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75mm retract window to match varying pallet thicknesses on a packaging line, using the equal 825 N both-way force to push and pull loads without stroke recalibration.
Fine-tune the 275-350mm end stop precisely during CNC fixture commissioning, locking the rear screw once the optimal depth is found for repeatable metal pressing.
Adjust the retract stroke on the fly to align material edges in a web guide system, relying on the 30mm adjustable air cushions to decelerate the 350mm travel smoothly.
Confirm this 75mm adjustment window covers your positioning range. If you need less force, the adjacent 40mm bore yields 528 N both ways at 0.5 MPa; if your payload is heavier, step up to the 63mm bore for 1402 N. If you never need to fine-tune the end position, a fixed-stroke SED cylinder is sufficient. Remember, the air cushion and stop screw only set the mechanical end and decelerate near stroke end; a plain SEJ does not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 50mm bore, 350mm stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 75mm adjustment window allows you to mechanically dial the retract stroke from 275mm up to the full 350mm. You set the exact end position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.